From mboxrd@z Thu Jan  1 00:00:00 1970
From: shawn.guo@freescale.com (Shawn Guo)
Date: Sat, 22 Mar 2014 14:50:40 +0800
Subject: [PATCH 5/5] ARM: dts: tx53: Add IPU DI ports and endpoints
In-Reply-To: <1395235721-13847-5-git-send-email-LW@KARO-electronics.de>
References: <1395235721-13847-1-git-send-email-LW@KARO-electronics.de>
 <1395235721-13847-5-git-send-email-LW@KARO-electronics.de>
Message-ID: <20140322065038.GE5938@dragon>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Wed, Mar 19, 2014 at 02:28:41PM +0100, Lothar Wa?mann wrote:
> 
> Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de>
> ---
>  arch/arm/boot/dts/imx53-tx53-x03x.dts |    7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts
> index 0217dde3..43b4b7b 100644
> --- a/arch/arm/boot/dts/imx53-tx53-x03x.dts
> +++ b/arch/arm/boot/dts/imx53-tx53-x03x.dts
> @@ -25,12 +25,17 @@
>  	soc {
>  		display: display at di0 {
>  			compatible = "fsl,imx-parallel-display";
> -			crtcs = <&ipu 0>;
>  			interface-pix-fmt = "rgb24";
>  			pinctrl-names = "default";
>  			pinctrl-0 = <&pinctrl_rgb24_vga1>;
>  			status = "okay";
>  
> +			port {
> +				display0_in: endpoint {
> +					remote-endpoint = <&ipu_di0_disp0>;
> +				};
> +			};
> +

I shouldn't apply this until I rebase my branch on 3.15-rc1 where
Philipp's OF graph is to be seen, right?

Shawn

>  			display-timings {
>  				VGA {
>  					clock-frequency = <25200000>;
> -- 
> 1.7.10.4
> 
> 
>