From mboxrd@z Thu Jan  1 00:00:00 1970
From: b.galvani@gmail.com (Beniamino Galvani)
Date: Tue, 25 Mar 2014 20:43:59 +0100
Subject: [PATCH] pinctrl: rockchip: fix offset of mux registers for rk3188
In-Reply-To: <2790002.5U2DHYmUbK@diego>
References: <1395700561-3793-1-git-send-email-b.galvani@gmail.com>
 <2790002.5U2DHYmUbK@diego>
Message-ID: <20140325194357.GA27520@gmail.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Tue, Mar 25, 2014 at 12:14:42AM +0100, Heiko St?bner wrote:
> Am Montag, 24. M?rz 2014, 23:36:01 schrieb Beniamino Galvani:
> > The correct value of .mux_offset for rk3188 seems to be 0x60
> > instead of 0x68.
> 
> Executive summary: the offset-change itself is correct, therefore
> 
> Reviewed-by: Heiko Stuebner <heiko@sntech.de>
> 
> That is what one gets when the only source is a vendor tree.
> I've looked it up again, and it seems you're right with the offset, but there 
> seems to be more to it ;-)
> 
> GPIO0 only has the second two IOMUX registers:
> - GRF_GPIO0C_IOMUX at 0x68
> - GRF_GPIO0D_IOMUX at 0x6c
> which I guess is where my mistake comes from.
> 
> It looks like there does no iomux register exist at all for the first 16 pins.
> 
> In any case, the current number is wrong, and the 0x60 offset is the correct 
> one, but I guess we need to determine what the affected pins do - do they 
> always have a gpio mux or such?

On radxa rock schematic pins GPIO0A* and GPIO0B* are labeled only as
gpios, without alternate functions like other pins; my guess is that
on rk3188 they can only act as gpios and so mux registers are not
needed for them.

Beniamino

> 
> Thanks for catching the mistake.
> 
> Heiko
> 
> > Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
> > ---
> >  drivers/pinctrl/pinctrl-rockchip.c |    2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/drivers/pinctrl/pinctrl-rockchip.c
> > b/drivers/pinctrl/pinctrl-rockchip.c index 46dddc1..23e8812 100644
> > --- a/drivers/pinctrl/pinctrl-rockchip.c
> > +++ b/drivers/pinctrl/pinctrl-rockchip.c
> > @@ -1534,7 +1534,7 @@ static struct rockchip_pin_ctrl rk3188_pin_ctrl = {
> >  		.nr_banks		= ARRAY_SIZE(rk3188_pin_banks),
> >  		.label			= "RK3188-GPIO",
> >  		.type			= RK3188,
> > -		.mux_offset		= 0x68,
> > +		.mux_offset		= 0x60,
> >  		.pull_calc_reg		= rk3188_calc_pull_reg_and_bit,
> >  };
>