[PATCH v7 2/3] clk: exynos5410: register clocks using common clock framework

[mturquette@linaro.org (Mike Turquette)]

Quoting Tarek Dakhran (2014-02-23 19:43:54)
> +External clock:
> +
> +There is clock that is generated outside the SoC. It is expected
> +that it is defined using standard clock bindings with following
> +clock-output-name:
> + - "fin_pll" - PLL input clock - required.

<snip>

> +Example 2: Required external clock.
> +
> +       fin_pll: clock-fin-pll {
> +               compatible = "fixed-clock";
> +               reg = <0>;
> +               #clock-cells = <0>;
> +               clock-frequency = <24000000>;
> +               clock-output-names = "fin_pll";
> +       };

I guess this part is a little strange for a binding definition.
Basically this is DTS data specific to 5410; not sure why it belongs in
the DT binding definition.

Rest of the clock driver appears OK to me.

Regards,
Mike