From: s.hauer@pengutronix.de (Sascha Hauer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM i.MX51: Add Digi ConnectCore devicetree
Date: Thu, 3 Apr 2014 08:49:59 +0200 [thread overview]
Message-ID: <20140403064959.GD17250@pengutronix.de> (raw)
In-Reply-To: <533C4FF5.1010402@gmail.com>
On Wed, Apr 02, 2014 at 07:59:17PM +0200, Dirk Behme wrote:
> Am 02.04.2014 19:44, schrieb Robert Schwebel:
> >[adding Nicolas to Cc]
> >
> >On Wed, Apr 02, 2014 at 02:53:18PM +0200, Sascha Hauer wrote:
> >>On Wed, Apr 02, 2014 at 07:39:35PM +0800, Shawn Guo wrote:
> >>>On Sat, Mar 29, 2014 at 10:48:26AM +0400, Alexander Shiyan wrote:
> >>>>+&nfc {
> >>>>+ pinctrl-names = "default";
> >>>>+ pinctrl-0 = <&pinctrl_nfc>;
> >>>>+ nand-bus-width = <8>;
> >>>>+ nand-ecc-mode = "hw";
> >>>>+ nand-on-flash-bbt;
> >>>>+ #address-cells = <1>;
> >>>>+ #size-cells = <1>;
> >>>>+ status = "okay";
> >>>>+
> >>>>+ partition at 0 {
> >>>>+ label = "boot";
> >>>>+ reg = <0x00000 0x80000>;
> >>>>+ };
> >>>>+
> >>>>+ partition at 1 {
> >>>>+ label = "env";
> >>>>+ reg = <0x80000 0x40000>;
> >>>>+ };
> >>>
> >>>@Sascha, does the argument that we shouldn't have partition table in the
> >>>mainline dtb still stands?
> >>
> >>Yes, I still think the partitions shouldn't be in the Linux dts files.
> >
> >The dtb files for the Atmel Xplained board also has a partition
> >definition, so the same comment applies there, too.
> >
> >Besides being no hardware description, this implies a certain way of
> >using the system; for example, with the "kernel" plus "rootfs"
> >partitions, it suggests that you can't have the kernel in the standard
> >root filesystem (which is possible with barebox and the freedesktop.org
> >bootloader specification).
>
> Just out of curiosity, because I never got a good answer to this
> question (but maybe I asked the wrong way):
>
> If not in the dts, where should the partition table be put instead, then?
I think the bootloader should provide it. The bootloader has the chance
to fill in the correct data from its own configuration (which can be a
devicetree aswell). We should at least make sure that the bootloader and
the kernel use a consistent partition table.
(Which reminds me that barebox also doesn't do this correctly atm)
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2014-04-03 6:49 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-29 6:48 [PATCH] ARM: dts: imx27-phytec-phycore-rdk: Add display control signal definitions Alexander Shiyan
2014-03-29 6:48 ` [PATCH] ARM i.MX51: Add Digi ConnectCore devicetree Alexander Shiyan
2014-04-02 11:39 ` Shawn Guo
2014-04-02 11:45 ` Alexander Shiyan
2014-04-02 11:56 ` Shawn Guo
2014-04-02 12:06 ` Alexander Shiyan
2014-04-02 12:47 ` Shawn Guo
2014-04-02 12:56 ` Alexander Shiyan
2014-04-02 13:20 ` Shawn Guo
2014-04-02 12:53 ` Sascha Hauer
2014-04-02 17:44 ` Robert Schwebel
2014-04-02 17:59 ` Dirk Behme
2014-04-02 18:08 ` Alexander Shiyan
2014-04-03 6:49 ` Sascha Hauer [this message]
2014-04-02 11:25 ` [PATCH] ARM: dts: imx27-phytec-phycore-rdk: Add display control signal definitions Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140403064959.GD17250@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).