[PATCH 1/2] ARM: mvebu: enable the SDHCI interface on Armada 385

[thomas.petazzoni@free-electrons.com (Thomas Petazzoni)]

Dear Andrew Lunn,

On Fri, 4 Apr 2014 18:00:13 +0200, Andrew Lunn wrote:

> > diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
> > index a064f59..2c1ff30 100644
> > --- a/arch/arm/boot/dts/armada-38x.dtsi
> > +++ b/arch/arm/boot/dts/armada-38x.dtsi
> > @@ -355,6 +355,15 @@
> >  				clocks = <&coredivclk 0>;
> >  				status = "disabled";
> >  			};
> > +
> > +			sdhci at d8000 {
> > +				compatible = "marvell,armada-380-sdhci";
> > +				reg = <0xd8000 0x1000>, <0xdc000 0x100>;
> > +				interrupts = <0 25 0x4>;
> > +				clocks = <&gateclk 17>;
> > +				mrvl,clk-delay-cycles = <0x1F>;
> 
> Hi Thomas
> 
> Maybe this has been discussed as part of the previous patchset. Why
> the mrvl prefix, not marvell? marvell is in vendor-prefixes.txt, but
> mrvl does not appear to be listed.

Because I'm not the one who introduced this part of the driver DT
binding. It has been added two years ago by:

commit b650352dd3df36164e3427bff3f33bc06ac47642
Author: Chris Ball <cjb@laptop.org>
Date:   Tue Apr 10 22:34:33 2012 -0400

    mmc: sdhci-pxa: Add device tree support
    
    Tested on an OLPC XO-1.75.  (MMP2, sdhci-pxav3, CONFIG_MACH_MMP2_DT=y)
    
    Signed-off-by: Chris Ball <cjb@laptop.org>
    Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>

So I'm just merely using the existing DT binding for the driver. Of
course, since I'm introducing a new compatible string, I could also
change the driver to support the same property prefixed by "marvell,",
but it would also have to support the old DT property forever, so is it
really useful?

Best regards,

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com