From: andrew@lunn.ch (Andrew Lunn)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/5] Support for Marvell AHCI interface on Armada 38x
Date: Mon, 14 Apr 2014 17:21:07 +0200 [thread overview]
Message-ID: <20140414152107.GD22546@lunn.ch> (raw)
In-Reply-To: <1397486055-16303-1-git-send-email-thomas.petazzoni@free-electrons.com>
On Mon, Apr 14, 2014 at 04:34:10PM +0200, Thomas Petazzoni wrote:
> Hello,
>
> The Marvell Armada 38x ARM processors use an AHCI compatible interface
> for SATA (in replacement of the Marvell-specific SATA interface,
> handled by the sata_mv driver). However, like all DMA-capable Marvell
> interfaces, some specific MBus window configuration must be done, so a
> small specific glue layer is needed, which relies on the recently
> introduced libahci_platform.c.
>
> Changes since v1:
>
> * Rebased on top of v3.15-rc1
>
> * Added a preliminary patch that orders alphabetically the list of
> compatible strings in the DT binding document
> ahci-platform.txt. Suggested by Andrew Lunn.
>
> * Made the availability of MBus DRAM window informations
> mandatory. Suggested by Andrew Lunn.
>
> * Fixed the module alias name. Suggested by Bartlomiej
> Zolnierkiewicz.
Acked-by: Andrew Lunn <andrew@lunn.ch>
Andrew
>
> Details of the patches:
>
> * The first patch is a DT binding documentation cleanup. I believe it
> should be taken by the ATA maintainer, because the second patch
> (driver patch) depends on it.
>
> * The second patch of this series contains the driver itself, which
> is fairly straight-forward. It should be taken by Tejun Heo as the
> ATA maintainer.
>
> * The last three patches add the Device Tree and defconfig
> changes. They should be taken by the respective ARM maintainers
> (mvebu maintainers for the DT and mvebu_v7_defconfig, and arm-soc
> maintainers for the multi_v7_defconfig change).
>
> Thanks!
>
> Thomas
>
> Thomas Petazzoni (5):
> Documentation: dt-bindings: reformat and order list of ahci-platform
> compatibles
> ata: ahci_mvebu: new driver for Marvell Armada 380 AHCI interfaces
> ARM: mvebu: add Device Tree description of AHCI interfaces on Armada
> 38x
> ARM: configs: add ahci_mvebu to mvebu_v7_defconfig
> ARM: configs: add ahci_mvebu to multi_v7_defconfig
>
> .../devicetree/bindings/ata/ahci-platform.txt | 13 ++-
> arch/arm/boot/dts/armada-385-db.dts | 8 ++
> arch/arm/boot/dts/armada-38x.dtsi | 16 +++
> arch/arm/configs/multi_v7_defconfig | 1 +
> arch/arm/configs/mvebu_v7_defconfig | 1 +
> drivers/ata/Kconfig | 9 ++
> drivers/ata/Makefile | 1 +
> drivers/ata/ahci_mvebu.c | 107 +++++++++++++++++++++
> 8 files changed, 152 insertions(+), 4 deletions(-)
> create mode 100644 drivers/ata/ahci_mvebu.c
>
> --
> 1.8.3.2
>
next prev parent reply other threads:[~2014-04-14 15:21 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-14 14:34 [PATCH v2 0/5] Support for Marvell AHCI interface on Armada 38x Thomas Petazzoni
2014-04-14 14:34 ` [PATCH v2 1/5] Documentation: dt-bindings: reformat and order list of ahci-platform compatibles Thomas Petazzoni
2014-04-14 15:14 ` Andrew Lunn
2014-04-14 14:34 ` [PATCH v2 2/5] ata: ahci_mvebu: new driver for Marvell Armada 380 AHCI interfaces Thomas Petazzoni
2014-04-14 14:34 ` [PATCH v2 3/5] ARM: mvebu: add Device Tree description of AHCI interfaces on Armada 38x Thomas Petazzoni
2014-04-14 14:34 ` [PATCH v2 4/5] ARM: configs: add ahci_mvebu to mvebu_v7_defconfig Thomas Petazzoni
2014-04-14 14:34 ` [PATCH v2 5/5] ARM: configs: add ahci_mvebu to multi_v7_defconfig Thomas Petazzoni
2014-04-14 15:21 ` Andrew Lunn [this message]
2014-04-14 15:53 ` [PATCH v2 0/5] Support for Marvell AHCI interface on Armada 38x Bartlomiej Zolnierkiewicz
2014-04-14 16:01 ` Thomas Petazzoni
2014-04-14 16:13 ` Bartlomiej Zolnierkiewicz
2014-04-14 16:19 ` Thomas Petazzoni
2014-04-14 17:46 ` Tejun Heo
2014-04-14 18:44 ` Thomas Petazzoni
2014-04-16 17:07 ` Jason Cooper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140414152107.GD22546@lunn.ch \
--to=andrew@lunn.ch \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).