From mboxrd@z Thu Jan 1 00:00:00 1970 From: horms@verge.net.au (Simon Horman) Date: Tue, 15 Apr 2014 07:38:26 +0900 Subject: [PATCH v2 6/6] ARM: shmobile: sh73a0: drop address cells from GIC node In-Reply-To: <1397485098-19198-6-git-send-email-l.stach@pengutronix.de> References: <1397485098-19198-1-git-send-email-l.stach@pengutronix.de> <1397485098-19198-6-git-send-email-l.stach@pengutronix.de> Message-ID: <20140414223826.GA22518@verge.net.au> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Mon, Apr 14, 2014 at 04:18:18PM +0200, Lucas Stach wrote: > This is likely a copy-and-paste error from the > ARM GIC documentation, that has already been fixed. > > address-cells should have been set to 0, as with the size > cells. As having those properties set to 0 is the > same thing as not specifying them, drop them completely. > > Signed-off-by: Lucas Stach > Acked-by: Rob Herring > --- > v2: split patch, added ack Thanks, I have queued this up as a fix for v3.15. > --- > arch/arm/boot/dts/sh73a0.dtsi | 1 - > 1 file changed, 1 deletion(-) > > diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi > index b7bd3b9a6753..5ecf552e1c00 100644 > --- a/arch/arm/boot/dts/sh73a0.dtsi > +++ b/arch/arm/boot/dts/sh73a0.dtsi > @@ -34,7 +34,6 @@ > gic: interrupt-controller at f0001000 { > compatible = "arm,cortex-a9-gic"; > #interrupt-cells = <3>; > - #address-cells = <1>; > interrupt-controller; > reg = <0xf0001000 0x1000>, > <0xf0000100 0x100>; > -- > 1.9.1 >