From mboxrd@z Thu Jan  1 00:00:00 1970
From: antoine.tenart@free-electrons.com (Antoine =?iso-8859-1?Q?T=E9nart?=)
Date: Tue, 15 Apr 2014 11:35:49 +0200
Subject: [PATCH 2/2] ARM: dts: berlin: add GPIO nodes for the BG2Q
In-Reply-To: <534CFA77.9030108@gmail.com>
References: <1397549245-3338-1-git-send-email-antoine.tenart@free-electrons.com>
 <1397549245-3338-3-git-send-email-antoine.tenart@free-electrons.com>
 <534CFA77.9030108@gmail.com>
Message-ID: <20140415093549.GD4584@kwain>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Sebastian,

On Tue, Apr 15, 2014 at 11:23:03AM +0200, Sebastian Hesselbarth wrote:
> On 04/15/2014 10:07 AM, Antoine T?nart wrote:

[?]

> >diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
> >index e6e556055dfc..b2625f896bc5 100644
> >--- a/arch/arm/boot/dts/berlin2q.dtsi
> >+++ b/arch/arm/boot/dts/berlin2q.dtsi
> >@@ -109,6 +109,78 @@
> >  			ranges = <0 0xe80000 0x10000>;
> >  			interrupt-parent = <&aic>;
> >
> >+			gpio0: gpio at 0400 {
> >+				compatible = "snps,dw-apb-gpio";
> >+				reg = <0x0400 0x400>;
> >+				#address-cells = <1>;
> >+				#size-cells = <0>;
> >+
> >+				porta: gpio-controller at 0 {
> 
> ePAPR recommended name is even more generic, i.e. "gpio". If
> that clashed in any way with other numbered names, I suggest
> to rename to "gpio-port" as actually the controller is the
> parent node and this represents one port (in the nomenclature
> of DW-APB-GPIO).

I followed the dwapb GPIO binding documentation, but I think this is a good
idea. I'll update.

> >+					compatible = "snps,dw-apb-gpio-port";
> >+					gpio-controller;
> >+					#gpio-cells = <2>;
> >+					snps,nr-gpios = <32>;
> 
> 32 gpio pins for each of the 6 GPIO controllers? Either BG2Q is a GPIO
> beast or it is a mistake :P
> 
> Can you please double-check?

Maybe Jisheng can confirm this.

> I am fine with using nr-gpios property now, but I guess BG2Q also
> has that CONFIG[1,2] registers to actually read out the features
> synthesized in? If I find some time, I'll prepare a patch for
> dw-apb-gpio to exploit that (optional) information instead of
> using nr-gpios.

Maybe, that would be nice.


Antoine

> Otherwise,
> 
> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
> 
> >+					reg = <0>;
> >+					interrupt-controller;
> >+					#interrupt-cells = <2>;
> >+					interrupts = <0>;
> >+				};
> >+			};
> >+
> >+			gpio1: gpio at 0800 {
> >+				compatible = "snps,dw-apb-gpio";
> >+				reg = <0x0800 0x400>;
> >+				#address-cells = <1>;
> >+				#size-cells = <0>;
> >+
> >+				portb: gpio-controller at 1 {
> >+					compatible = "snps,dw-apb-gpio-port";
> >+					gpio-controller;
> >+					#gpio-cells = <2>;
> >+					snps,nr-gpios = <32>;
> >+					reg = <0>;
> >+					interrupt-controller;
> >+					#interrupt-cells = <2>;
> >+					interrupts = <1>;
> >+				};
> >+			};
> >+
> >+			gpio2: gpio at 0c00 {
> >+				compatible = "snps,dw-apb-gpio";
> >+				reg = <0x0c00 0x400>;
> >+				#address-cells = <1>;
> >+				#size-cells = <0>;
> >+
> >+				portc: gpio-controller at 2 {
> >+					compatible = "snps,dw-apb-gpio-port";
> >+					gpio-controller;
> >+					#gpio-cells = <2>;
> >+					snps,nr-gpios = <32>;
> >+					reg = <0>;
> >+					interrupt-controller;
> >+					#interrupt-cells = <2>;
> >+					interrupts = <2>;
> >+				};
> >+			};
> >+
> >+			gpio3: gpio at 1000 {
> >+				compatible = "snps,dw-apb-gpio";
> >+				reg = <0x1000 0x400>;
> >+				#address-cells = <1>;
> >+				#size-cells = <0>;
> >+
> >+				portd: gpio-controller at 3 {
> >+					compatible = "snps,dw-apb-gpio-port";
> >+					gpio-controller;
> >+					#gpio-cells = <2>;
> >+					snps,nr-gpios = <32>;
> >+					reg = <0>;
> >+					interrupt-controller;
> >+					#interrupt-cells = <2>;
> >+					interrupts = <3>;
> >+				};
> >+			};
> >+
> >  			timer0: timer at 2c00 {
> >  				compatible = "snps,dw-apb-timer";
> >  				reg = <0x2c00 0x14>;
> >@@ -181,6 +253,36 @@
> >  				interrupt-parent = <&gic>;
> >  				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> >  			};
> >+
> >+			gpio4: gpio at 5000 {
> >+				compatible = "snps,dw-apb-gpio";
> >+				reg = <0x5000 0x400>;
> >+				#address-cells = <1>;
> >+				#size-cells = <0>;
> >+
> >+				porte: gpio-controller at 4 {
> >+					compatible = "snps,dw-apb-gpio-port";
> >+					gpio-controller;
> >+					#gpio-cells = <2>;
> >+					snps,nr-gpios = <32>;
> >+					reg = <0>;
> >+				};
> >+			};
> >+
> >+			gpio5: gpio at c000 {
> >+				compatible = "snps,dw-apb-gpio";
> >+				reg = <0xc000 0x400>;
> >+				#address-cells = <1>;
> >+				#size-cells = <0>;
> >+
> >+				portf: gpio-controller at 5 {
> >+					compatible = "snps,dw-apb-gpio-port";
> >+					gpio-controller;
> >+					#gpio-cells = <2>;
> >+					snps,nr-gpios = <32>;
> >+					reg = <0>;
> >+				};
> >+			};
> >  		};
> >
> >  		pinctrl: pinctrl at 0 {
> >
> 

-- 
Antoine T?nart, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com