[PATCH 0/5] Simple-audio-card support for HP t5325

[jason@lakedaemon.net (Jason Cooper)]

Mark,

On Thu, Apr 17, 2014 at 05:53:09PM +0200, Andrew Lunn wrote:
> This patchset allows the Kirkwood based HP t5325 device make use of
> simple-card to instantiate its audio hardware.
> 
> Patch 1 Adds a DT binding to the ALC5623 codec
> Patch 2 Makes use of this new binding
> Patch 3 Add fixes up the kirkwood sound node in DT
> Patch 4 Extends simple-card to support the hw_params() needed
>         when using MVEBU sound hardware.
> Patch 5 Swaps t5323 to using DT, removing all need for C code.
> 
> Andrew Lunn (5):
>   ASoC: alc5623: Add device tree binding
>   ARM: Kirkwood: Use DT to instansiate codec
>   ARM: Kirkwood: DT: Add missing #sound-dai-cells property
>   ASoC: simple-card: Support setting mclk via a fixed factor
>   ARM: Kirkwood: t5325: Use simple-card to instantiate audio
> 
>  .../devicetree/bindings/sound/alc5623.txt          | 23 ++++++++++++
>  .../devicetree/bindings/sound/simple-card.txt      |  2 ++

Are you alright with taking the above,

>  arch/arm/boot/dts/kirkwood-t5325.dts               | 33 +++++++++++++++++
>  arch/arm/boot/dts/kirkwood.dtsi                    |  1 +
>  arch/arm/mach-mvebu/board-t5325.c                  | 41 ----------------------
>  arch/arm/mach-mvebu/board.h                        |  6 ----
>  arch/arm/mach-mvebu/kirkwood.c                     |  3 --

while I take these,

>  sound/soc/codecs/alc5623.c                         | 13 +++++++
>  sound/soc/generic/simple-card.c                    | 28 +++++++++++++++

and you take these?

That should be 1 and 4 for you and 2, 3, and 5 for me before Andrew does
the patch split I asked for in my other response.

thx,

Jason.