From: maxime.ripard@free-electrons.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 07/17] ARM: dts: sun5i: Add mmc controller nodes
Date: Wed, 23 Apr 2014 11:48:40 +0200 [thread overview]
Message-ID: <20140423094840.GL24905@lukather> (raw)
In-Reply-To: <1398164497-14212-8-git-send-email-hdegoede@redhat.com>
On Tue, Apr 22, 2014 at 01:01:27PM +0200, Hans de Goede wrote:
> From: David Lanzend?rfer <david.lanzendoerfer@o2s.ch>
>
> Add nodes for the 3 mmc controllers found on A10s SoCs and for the 2 mmc
> controllers found on A13 SoCs.
>
> Signed-off-by: David Lanzend?rfer <david.lanzendoerfer@o2s.ch>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> arch/arm/boot/dts/sun5i-a10s.dtsi | 27 +++++++++++++++++++++++++++
> arch/arm/boot/dts/sun5i-a13.dtsi | 18 ++++++++++++++++++
> 2 files changed, 45 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
> index 79989ed..12113f9 100644
> --- a/arch/arm/boot/dts/sun5i-a10s.dtsi
> +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
> @@ -338,6 +338,33 @@
> #size-cells = <0>;
> };
>
> + mmc0: mmc at 01c0f000 {
> + compatible = "allwinner,sun5i-a13-mmc";
> + reg = <0x01c0f000 0x1000>;
> + clocks = <&ahb_gates 8>, <&mmc0_clk>;
> + clock-names = "ahb", "mod";
> + interrupts = <32>;
> + status = "disabled";
> + };
> +
> + mmc1: mmc at 01c10000 {
> + compatible = "allwinner,sun5i-a13-mmc";
> + reg = <0x01c10000 0x1000>;
> + clocks = <&ahb_gates 9>, <&mmc1_clk>;
> + clock-names = "ahb", "mod";
> + interrupts = <33>;
> + status = "disabled";
> + };
> +
> + mmc2: mmc at 01c11000 {
> + compatible = "allwinner,sun5i-a13-mmc";
> + reg = <0x01c11000 0x1000>;
> + clocks = <&ahb_gates 10>, <&mmc2_clk>;
> + clock-names = "ahb", "mod";
> + interrupts = <34>;
> + status = "disabled";
> + };
> +
> usbphy: phy at 01c13400 {
> #phy-cells = <1>;
> compatible = "allwinner,sun5i-a13-usb-phy";
> diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
> index f01c315..a0e55e8 100644
> --- a/arch/arm/boot/dts/sun5i-a13.dtsi
> +++ b/arch/arm/boot/dts/sun5i-a13.dtsi
> @@ -320,6 +320,24 @@
> #size-cells = <0>;
> };
>
> + mmc0: mmc at 01c0f000 {
> + compatible = "allwinner,sun5i-a13-mmc";
> + reg = <0x01c0f000 0x1000>;
> + clocks = <&ahb_gates 8>, <&mmc0_clk>;
> + clock-names = "ahb", "mod";
> + interrupts = <32>;
> + status = "disabled";
> + };
> +
> + mmc2: mmc at 01c11000 {
> + compatible = "allwinner,sun5i-a13-mmc";
> + reg = <0x01c11000 0x1000>;
> + clocks = <&ahb_gates 10>, <&mmc2_clk>;
> + clock-names = "ahb", "mod";
> + interrupts = <34>;
> + status = "disabled";
> + };
> +
The A13 user manual reports that there is 3 of them in the A13, just
like on the A10s. Have you forgotten one?
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140423/adabe2e0/attachment.sig>
next prev parent reply other threads:[~2014-04-23 9:48 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-22 11:01 [PATCH v8 00/17] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs Hans de Goede
2014-04-22 11:01 ` [PATCH v8 01/17] clk: sunxi: factors: automatic reparenting support Hans de Goede
2014-04-22 11:01 ` [PATCH v8 02/17] clk: sunxi: Implement MMC phase control Hans de Goede
2014-04-22 11:01 ` [PATCH v8 03/17] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs Hans de Goede
2014-04-22 11:01 ` [PATCH v8 04/17] ARM: dts: sun4i: Add mmc controller nodes Hans de Goede
2014-04-22 11:01 ` [PATCH v8 05/17] ARM: dts: sun4i: Add pin-muxing info for the mmc0 controller Hans de Goede
2014-04-22 11:01 ` [PATCH v8 06/17] ARM: dts: sun4i: Enable mmc controller on various A10 boards Hans de Goede
2014-04-22 11:01 ` [PATCH v8 07/17] ARM: dts: sun5i: Add mmc controller nodes Hans de Goede
2014-04-23 9:48 ` Maxime Ripard [this message]
2014-04-23 9:57 ` [linux-sunxi] " Hans de Goede
2014-04-22 11:01 ` [PATCH v8 08/17] ARM: dts: sun5i: Add pin-muxing info for the mmc controllers Hans de Goede
2014-04-22 11:01 ` [PATCH v8 09/17] ARM: dts: sun5i: Enable mmc controller on various A10s and A13 boards Hans de Goede
2014-04-22 11:01 ` [PATCH v8 10/17] ARM: dts: sun6i: Add mmc clocks Hans de Goede
2014-04-23 9:44 ` Maxime Ripard
2014-04-23 9:49 ` [linux-sunxi] " Hans de Goede
2014-04-22 11:01 ` [PATCH v8 11/17] ARM: dts: sun6i: Add mmc controller nodes Hans de Goede
2014-04-23 9:50 ` Maxime Ripard
2014-04-23 10:11 ` Hans de Goede
2014-04-22 11:01 ` [PATCH v8 12/17] ARM: dts: sun6i: Add pin-muxing info for the mmc controllers Hans de Goede
2014-04-22 11:01 ` [PATCH v8 13/17] ARM: dts: sun6i: Add new sun6i-a31-m9 dts file for Mele M9 Hans de Goede
2014-04-22 11:01 ` [PATCH v8 14/17] ARM: dts: sun6i: Enable the mmc controller on the m9 Hans de Goede
2014-04-23 9:51 ` Maxime Ripard
2014-04-22 11:01 ` [PATCH v8 15/17] ARM: dts: sun7i: Add mmc controller nodes Hans de Goede
2014-04-22 11:01 ` [PATCH v8 16/17] ARM: dts: sun7i: Add pin-muxing info for the mmc controllers Hans de Goede
2014-04-22 11:01 ` [PATCH v8 17/17] ARM: dts: sun7i: Enable mmc controller on various A20 boards Hans de Goede
2014-04-22 12:07 ` [PATCH v8 00/17] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs Emilio López
2014-04-22 12:17 ` Hans de Goede
2014-04-23 9:40 ` Maxime Ripard
2014-04-23 9:53 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140423094840.GL24905@lukather \
--to=maxime.ripard@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).