From mboxrd@z Thu Jan 1 00:00:00 1970 From: balbi@ti.com (Felipe Balbi) Date: Fri, 25 Apr 2014 16:00:36 -0500 Subject: [PATCH] power: twl4030_charger: clear IRQs after handling them In-Reply-To: <535ACC62.102@ti.com> References: <1397661299-31342-1-git-send-email-balbi@ti.com> <20140416163526.GA3049@atomide.com> <535ACC62.102@ti.com> Message-ID: <20140425210036.GO29632@saruman.home> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Fri, Apr 25, 2014 at 03:58:10PM -0500, Nishanth Menon wrote: > On 04/16/2014 11:35 AM, Tony Lindgren wrote: > > * Felipe Balbi [140416 08:18]: > >> TRM says we *must* write 1 to each bit we're handling > >> in order to clear the IRQ status and bring IRQ line > >> low. This patch implements that. > >> > >> Signed-off-by: Felipe Balbi > >> --- > >> > >> Russell, I don't have HW to test, but this should > >> solve the problem you saw when not using battery > >> with Zoom board. Let me know if it doesn't. > > > > BTW, looks like we're enabling BCI automatically in twl4030.dtsi > > while the legacy booting does not have TWL_COMMON_PDATA_BCI > > enabled for LDP. Anyways, for LDP BCI should be enabled for > > sure, that's the only way to power at least the earlier LDP > > revisions. > > > I picked up https://patchwork.kernel.org/patch/4002371/ for testing. > > Unfortunately, it does not seem to work in my tests: alright, I'll have a look after I get this other issue out of the way. Probably not until next week. > This patch should probably also acknowledge that Russell reported this > issue. sure I can add that, although it doesn't solve anything as it is ... -- balbi -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: