[PATCH] ARM: tegra: use correct audio CODEC on Jetson TK1

[PATCH] ARM: tegra: use correct audio CODEC on Jetson TK1

[Stephen Warren]

From: Stephen Warren <swarren@nvidia.com>

Jetson TK1 contains an RT5639 not an RT5640. While the two are extremely
similar and mostly compatible, we should still use the correct device
name in the device tree. I had meant to fix this before applying the
initial DT, but this issue slipped my mind.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
 arch/arm/boot/dts/tegra124-jetson-tk1.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index dd3076d94727..b8931f0ee026 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1346,8 +1346,8 @@
 		status = "okay";
 		clock-frequency = <100000>;
 
-		rt5640: audio-codec at 1c {
-			compatible = "realtek,rt5640";
+		rt5639: audio-codec at 1c {
+			compatible = "realtek,rt5639";
 			reg = <0x1c>;
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
@@ -1779,7 +1779,7 @@
 			"IN2P", "Mic Jack";
 
 		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&rt5640>;
+		nvidia,audio-codec = <&rt5639>;
 
 		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_LOW>;
 
-- 
1.8.1.5

[PATCH] ARM: tegra: use correct audio CODEC on Jetson TK1

[Thierry Reding]

On Fri, Apr 25, 2014 at 10:23:32AM -0600, Stephen Warren wrote:
> From: Stephen Warren <swarren@nvidia.com>
> 
> Jetson TK1 contains an RT5639 not an RT5640. While the two are extremely
> similar and mostly compatible, we should still use the correct device
> name in the device tree. I had meant to fix this before applying the
> initial DT, but this issue slipped my mind.
> 
> Signed-off-by: Stephen Warren <swarren@nvidia.com>
> ---
>  arch/arm/boot/dts/tegra124-jetson-tk1.dts | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)

Reviewed-by: Thierry Reding <treding@nvidia.com>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140426/d8cb5e3b/attachment.sig>

[PATCH] ARM: tegra: use correct audio CODEC on Jetson TK1

[Stephen Warren]

On 04/25/2014 10:23 AM, Stephen Warren wrote:
> Jetson TK1 contains an RT5639 not an RT5640. While the two are extremely
> similar and mostly compatible, we should still use the correct device
> name in the device tree. I had meant to fix this before applying the
> initial DT, but this issue slipped my mind.

I have applied this to Tegra's for-3.16/dt branch.