From mboxrd@z Thu Jan 1 00:00:00 1970 From: antoine.tenart@free-electrons.com (Antoine =?iso-8859-1?Q?T=E9nart?=) Date: Mon, 28 Apr 2014 19:03:29 +0200 Subject: [PATCH v2 2/7] pinctrl: berlin: add the BG2Q pinctrl driver In-Reply-To: <535B7C8A.6000003@gmail.com> References: <1398268276-9696-1-git-send-email-antoine.tenart@free-electrons.com> <1398268276-9696-3-git-send-email-antoine.tenart@free-electrons.com> <535B7C8A.6000003@gmail.com> Message-ID: <20140428170329.GA4211@kwain> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Sebastian, On Sat, Apr 26, 2014 at 11:29:46AM +0200, Sebastian Hesselbarth wrote: > On 04/23/2014 05:51 PM, Antoine T?nart wrote: [?] > > + BERLIN_PINCTRL_GROUP("G2", 0x18, 0x3, 0x06, > > + BERLIN_PINCTRL_FUNCTION(0x0, "gpio"), > > + BERLIN_PINCTRL_FUNCTION(0x2, "arc"), > > + BERLIN_PINCTRL_FUNCTION(0x3, "lvds_vsync")), > > Shouldn't the above be: > > BERLIN_PINCTRL_FUNCTION(0x3, "lvds"))), /* vsync */ Sure. [?] > > + BERLIN_PINCTRL_GROUP("G6", 0x18, 0x3, 0x12, > > + BERLIN_PINCTRL_FUNCTION(0x0, "soc"), > > Uhm, any idea what "soc" is for? If not, just leave it. That should be 'jtag', I'll update. [?] > > + BERLIN_PINCTRL_GROUP("G13", 0x1c, 0x3, 0x09, > > + BERLIN_PINCTRL_FUNCTION(0x0, "gpio"), > > + BERLIN_PINCTRL_FUNCTION(0x1, "sts1"), > > Any idea what "sts" means, maybe "ts" is for Transport Stream? > No need to change it, I am just curious. STS stands for Serial Transport Stream. There may be a more common name for this, any idea ? > > + BERLIN_PINCTRL_GROUP("GAV11", 0x28, 0x3, 0x0c, > > + BERLIN_PINCTRL_FUNCTION(0x0, "avio"), > > + BERLIN_PINCTRL_FUNCTION(0x1, "dv0"), > > + BERLIN_PINCTRL_FUNCTION(0x2, "fp"), > > + BERLIN_PINCTRL_FUNCTION(0x3, "i2s0"), > > + BERLIN_PINCTRL_FUNCTION(0x4, "avio_pwm"), > > Is it the same "pwm" as for GAV8? If so, remove the "avio_" > prefix? Not the same, but 'pwm' makes sense here. Antoine -- Antoine T?nart, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com