From: christoffer.dall@linaro.org (Christoffer Dall)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 3/6] arm64: Add a description on 48-bit address space with 4KB pages
Date: Thu, 1 May 2014 03:06:12 -0700 [thread overview]
Message-ID: <20140501100612.GA2848@lvm> (raw)
In-Reply-To: <000301cf64e5$d27f9a20$777ece60$@samsung.com>
On Thu, May 01, 2014 at 11:34:05AM +0900, Jungseok Lee wrote:
> This patch adds memory layout and translation lookup information
> about 48-bit address space with 4K pages. The description is based
> on 4 levels of translation tables.
>
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Steve Capper <steve.capper@linaro.org>
> Signed-off-by: Jungseok Lee <jays.lee@samsung.com>
> Reviewed-by: Sungjinn Chung <sungjinn.chung@samsung.com>
> ---
> Documentation/arm64/memory.txt | 59 ++++++++++++++++++++++++++++++++++------
> 1 file changed, 51 insertions(+), 8 deletions(-)
>
> diff --git a/Documentation/arm64/memory.txt b/Documentation/arm64/memory.txt
> index d50fa61..8142709 100644
> --- a/Documentation/arm64/memory.txt
> +++ b/Documentation/arm64/memory.txt
> @@ -8,10 +8,11 @@ This document describes the virtual memory layout used by the AArch64
> Linux kernel. The architecture allows up to 4 levels of translation
> tables with a 4KB page size and up to 3 levels with a 64KB page size.
>
> -AArch64 Linux uses 3 levels of translation tables with the 4KB page
> -configuration, allowing 39-bit (512GB) virtual addresses for both user
> -and kernel. With 64KB pages, only 2 levels of translation tables are
> -used but the memory layout is the same.
> +AArch64 Linux uses 3 levels and 4 levels of translation tables with
uses either 3 or 4 levels of translation?
> +the 4KB page configuration, allowing 39-bit (512GB) and 48-bit (256TB)
> +virtual addresses, respectively, for both user and kernel. With 64KB
> +pages, only 2 levels of translation tables are used but the memory layout
> +is the same.
Perhaps it's worth clarifying that with 64KB and 2 levels of translation
tables we are limited to a 42-bit address space here.
>
> User addresses have bits 63:39 set to 0 while the kernel addresses have
> the same bits set to 1. TTBRx selection is given by bit 63 of the
> @@ -21,7 +22,7 @@ The swapper_pgd_dir address is written to TTBR1 and never written to
> TTBR0.
>
>
> -AArch64 Linux memory layout with 4KB pages:
> +AArch64 Linux memory layout with 4KB pages + 3 levels:
>
> Start End Size Use
> -----------------------------------------------------------------------
> @@ -48,7 +49,34 @@ ffffffbffc000000 ffffffbfffffffff 64MB modules
> ffffffc000000000 ffffffffffffffff 256GB kernel logical memory map
>
>
> -AArch64 Linux memory layout with 64KB pages:
> +AArch64 Linux memory layout with 4KB pages + 4 levels:
> +
> +Start End Size Use
> +-----------------------------------------------------------------------
> +0000000000000000 0000ffffffffffff 256TB user
> +
> +ffff000000000000 ffff7bfffffeffff ~124TB vmalloc
> +
> +ffff7bffffff0000 ffff7bffffffffff 64KB [guard page]
> +
> +ffff7c0000000000 ffff7dffffffffff 2TB vmemmap
> +
> +ffff7e0000000000 ffff7ffffbbfffff ~2TB [guard, future vmmemap]
hmm, I may be completely confused, but if VMALLOC_END is defined to be
(PAGE_OFFSET - UL(0x400000000) - SZ_64K), how can we squeeze ~4TB into a 16 GB hole?
> +
> +ffff7ffffa000000 ffff7ffffaffffff 16MB PCI I/O space
> +
> +ffff7ffffb000000 ffff7ffffbbfffff 12MB [guard]
> +
> +ffff7ffffbc00000 ffff7ffffbdfffff 2MB earlyprintk device
shouldn't this be "fixed mappings" now?
> +
> +ffff7ffffbe00000 ffff7ffffbffffff 2MB [guard]
> +
> +ffff7ffffc000000 ffff7fffffffffff 64MB modules
> +
> +ffff800000000000 ffffffffffffffff 128TB kernel logical memory map
> +
> +
> +AArch64 Linux memory layout with 64KB pages + 2 levels:
>
> Start End Size Use
> -----------------------------------------------------------------------
> @@ -75,7 +103,7 @@ fffffdfffc000000 fffffdffffffffff 64MB modules
> fffffe0000000000 ffffffffffffffff 2TB kernel logical memory map
>
>
> -Translation table lookup with 4KB pages:
> +Translation table lookup with 4KB pages + 3 levels:
>
> +--------+--------+--------+--------+--------+--------+--------+--------+
> |63 56|55 48|47 40|39 32|31 24|23 16|15 8|7 0|
> @@ -90,7 +118,22 @@ Translation table lookup with 4KB pages:
> +-------------------------------------------------> [63] TTBR0/1
>
>
> -Translation table lookup with 64KB pages:
> +Translation table lookup with 4KB pages + 4 levels:
> +
> ++--------+--------+--------+--------+--------+--------+--------+--------+
> +|63 56|55 48|47 40|39 32|31 24|23 16|15 8|7 0|
> ++--------+--------+--------+--------+--------+--------+--------+--------+
> + | | | | | |
> + | | | | | v
> + | | | | | [11:0] in-page offset
> + | | | | +-> [20:12] L3 index
> + | | | +-----------> [29:21] L2 index
> + | | +---------------------> [38:30] L1 index
> + | +-------------------------------> [47:39] L0 index
> + +-------------------------------------------------> [63] TTBR0/1
> +
> +
> +Translation table lookup with 64KB pages + 2 levels:
>
> +--------+--------+--------+--------+--------+--------+--------+--------+
> |63 56|55 48|47 40|39 32|31 24|23 16|15 8|7 0|
> --
> 1.7.10.4
>
>
next prev parent reply other threads:[~2014-05-01 10:06 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-01 2:34 [PATCH v5 3/6] arm64: Add a description on 48-bit address space with 4KB pages Jungseok Lee
2014-05-01 10:06 ` Christoffer Dall [this message]
2014-05-02 2:13 ` Jungseok Lee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140501100612.GA2848@lvm \
--to=christoffer.dall@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).