From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Wed, 7 May 2014 22:11:49 -0500 Subject: [PATCH v2 5/7] clk: sunxi: add PRCM (Power/Reset/Clock Management) clks support In-Reply-To: <1399483554-8824-6-git-send-email-boris.brezillon@free-electrons.com> References: <1399483554-8824-1-git-send-email-boris.brezillon@free-electrons.com> <1399483554-8824-6-git-send-email-boris.brezillon@free-electrons.com> Message-ID: <20140508031149.GN7047@lukather> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, May 07, 2014 at 07:25:52PM +0200, Boris BREZILLON wrote: > The PRCM (Power/Reset/Clock Management) unit provides several clock > devices: > - AR100 clk: used to clock the Power Management co-processor > - AHB0 clk: used to clock the AHB0 bus > - APB0 clk and gates: used to clk peripherals connected to the APB0 bus > > Add support for these clks in a separate driver so that they can be probed > as platform devices instead of registered during early init. > This is needed to be able to probe PRCM MFD subdevices. > > Signed-off-by: Boris BREZILLON Acked-by: Maxime Ripard Thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: