From mboxrd@z Thu Jan  1 00:00:00 1970
From: lee.jones@linaro.org (Lee Jones)
Date: Thu, 8 May 2014 12:02:05 +0100
Subject: [PATCH v2 3/7] mfd: add support for sun6i PRCM
 (Power/Reset/Clock Management) unit
In-Reply-To: <1399483554-8824-4-git-send-email-boris.brezillon@free-electrons.com>
References: <1399483554-8824-1-git-send-email-boris.brezillon@free-electrons.com>
 <1399483554-8824-4-git-send-email-boris.brezillon@free-electrons.com>
Message-ID: <20140508110205.GB5767@lee--X1>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

> The PRCM (Power/Reset/Clock Management) block exposes several subdevices
> in different subsystems (clk, reset ...)
> 
> Add basic support for the PRCM unit with clk (AR100, AHB0, and APB0 clks)
> and reset controller subdevices.
> 
> Other subdevices might be added later (if needed).
> 
> Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
> ---
>  drivers/mfd/Kconfig      |   8 +++
>  drivers/mfd/Makefile     |   1 +
>  drivers/mfd/sun6i-prcm.c | 151 +++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 160 insertions(+)
>  create mode 100644 drivers/mfd/sun6i-prcm.c

[...]

> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/errno.h>
> +#include <linux/err.h>
> +#include <linux/spinlock.h>
> +#include <linux/io.h>
> +#include <linux/slab.h>
> +#include <linux/mutex.h>
> +#include <linux/completion.h>
> +#include <linux/irq.h>
> +#include <linux/jiffies.h>
> +#include <linux/bitops.h>
> +#include <linux/fs.h>
> +#include <linux/of.h>
> +#include <linux/of_irq.h>
> +#include <linux/platform_device.h>
> +#include <linux/uaccess.h>
> +#include <linux/mfd/core.h>

I'm pretty sure you don't need half of these.  Please only add the
ones you make use of.

[...]

> +	dev_info(&pdev->dev, "PRCM initialized\n");

Please remove this from here.

[...]

> +static struct platform_driver sun6i_prcm_driver = {
> +	.driver = {
> +		.name = "sun6i-prcm",
> +		.owner = THIS_MODULE,
> +		.of_match_table = sun6i_prcm_dt_ids,
> +	},
> +	.probe = sun6i_prcm_probe,

You need a .remove() call-back.

> +};
> +module_platform_driver(sun6i_prcm_driver);
> +
> +MODULE_AUTHOR("Boris BREZILLON <boris.brezillon@free-electrons.com>");
> +MODULE_DESCRIPTION("Allwinner sun6i PRCM driver");
> +MODULE_LICENSE("GPL v2");

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog