From: balbi@ti.com (Felipe Balbi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv5 07/20] usb: host: xhci-plat: add clock support
Date: Mon, 12 May 2014 12:37:02 -0500 [thread overview]
Message-ID: <20140512173702.GG31882@saruman.home> (raw)
In-Reply-To: <1399832288-19899-8-git-send-email-thomas.petazzoni@free-electrons.com>
On Sun, May 11, 2014 at 08:17:55PM +0200, Thomas Petazzoni wrote:
> From: Gregory CLEMENT <gregory.clement@free-electrons.com>
>
> Some platforms (such as the Armada 38x ones) can gate the clock of
> their USB controller. This patch adds the support for one clock in
> xhci-plat, by enabling it during probe and disabling it on remove.
>
> To achieve this, it adds a 'struct clk *' member in xhci_hcd. While
> only used for now in xhci-plat, it might be used by other drivers in
> the future. Moreover, the xhci_hcd structure already holds other
> members such as msix_count and msix_entries, which are MSI-X specific,
> and therefore only used by xhci-pci.
>
> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
FWIW
Acked-by: Felipe Balbi <balbi@ti.com>
> ---
> drivers/usb/host/xhci-plat.c | 24 +++++++++++++++++++++++-
> drivers/usb/host/xhci.h | 2 ++
> 2 files changed, 25 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
> index f5351af..8108e58 100644
> --- a/drivers/usb/host/xhci-plat.c
> +++ b/drivers/usb/host/xhci-plat.c
> @@ -11,6 +11,7 @@
> * version 2 as published by the Free Software Foundation.
> */
>
> +#include <linux/clk.h>
> #include <linux/dma-mapping.h>
> #include <linux/module.h>
> #include <linux/of.h>
> @@ -91,6 +92,7 @@ static int xhci_plat_probe(struct platform_device *pdev)
> struct xhci_hcd *xhci;
> struct resource *res;
> struct usb_hcd *hcd;
> + struct clk *clk;
> int ret;
> int irq;
>
> @@ -137,14 +139,27 @@ static int xhci_plat_probe(struct platform_device *pdev)
> goto release_mem_region;
> }
>
> + /*
> + * Not all platforms have a clk so it is not an error if the
> + * clock does not exists.
> + */
> + clk = devm_clk_get(&pdev->dev, NULL);
> + if (!IS_ERR(clk)) {
> + ret = clk_prepare_enable(clk);
> + if (ret)
> + goto unmap_registers;
> + }
> +
> ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
> if (ret)
> - goto unmap_registers;
> + goto disable_clk;
> +
> device_wakeup_enable(hcd->self.controller);
>
> /* USB 2.0 roothub is stored in the platform_device now. */
> hcd = platform_get_drvdata(pdev);
> xhci = hcd_to_xhci(hcd);
> + xhci->clk = clk;
> xhci->shared_hcd = usb_create_shared_hcd(driver, &pdev->dev,
> dev_name(&pdev->dev), hcd);
> if (!xhci->shared_hcd) {
> @@ -173,6 +188,10 @@ put_usb3_hcd:
> dealloc_usb2_hcd:
> usb_remove_hcd(hcd);
>
> +disable_clk:
> + if (!IS_ERR(clk))
> + clk_disable_unprepare(clk);
> +
> unmap_registers:
> iounmap(hcd->regs);
>
> @@ -189,11 +208,14 @@ static int xhci_plat_remove(struct platform_device *dev)
> {
> struct usb_hcd *hcd = platform_get_drvdata(dev);
> struct xhci_hcd *xhci = hcd_to_xhci(hcd);
> + struct clk *clk = xhci->clk;
>
> usb_remove_hcd(xhci->shared_hcd);
> usb_put_hcd(xhci->shared_hcd);
>
> usb_remove_hcd(hcd);
> + if (!IS_ERR(clk))
> + clk_disable_unprepare(clk);
> iounmap(hcd->regs);
> release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
> usb_put_hcd(hcd);
> diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
> index d280e92..003dc09 100644
> --- a/drivers/usb/host/xhci.h
> +++ b/drivers/usb/host/xhci.h
> @@ -1478,6 +1478,8 @@ struct xhci_hcd {
> /* msi-x vectors */
> int msix_count;
> struct msix_entry *msix_entries;
> + /* optional clock */
> + struct clk *clk;
> /* data structures */
> struct xhci_device_context_array *dcbaa;
> struct xhci_ring *cmd_ring;
> --
> 1.9.2
>
--
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140512/79e63d87/attachment.sig>
next prev parent reply other threads:[~2014-05-12 17:37 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-11 18:17 [PATCHv5 00/20] USB support for Armada 38x and Armada 375 Thomas Petazzoni
2014-05-11 18:17 ` [PATCHv5 01/20] usb: ehci-orion: use platform_get_irq() for DT probing Thomas Petazzoni
2014-05-11 18:17 ` [PATCHv5 02/20] usb: ehci-orion: rename error goto labels in ehci_orion_drv_probe() Thomas Petazzoni
2014-05-11 18:17 ` [PATCHv5 03/20] usb: ehci-orion: fix clock reference leaking Thomas Petazzoni
2014-05-11 18:17 ` [PATCHv5 04/20] usb: ehci-orion: add optional PHY support Thomas Petazzoni
2014-05-11 18:17 ` [PATCHv5 05/20] Documentation: dt-bindings: update ehci-orion binding documentation Thomas Petazzoni
2014-05-12 14:34 ` Gregory CLEMENT
2014-05-12 15:46 ` Alan Stern
2014-05-12 16:00 ` Gregory CLEMENT
2014-05-11 18:17 ` [PATCHv5 06/20] usb: host: xhci-plat: sort the headers in alphabetic order Thomas Petazzoni
2014-05-11 18:17 ` [PATCHv5 07/20] usb: host: xhci-plat: add clock support Thomas Petazzoni
2014-05-12 14:46 ` Gregory CLEMENT
2014-05-12 17:43 ` Mathias Nyman
2014-05-12 17:37 ` Felipe Balbi [this message]
2014-05-11 18:17 ` [PATCHv5 08/20] usb: host: xhci-plat: add support for the Armada 375/38x XHCI controllers Thomas Petazzoni
2014-05-12 17:24 ` Mathias Nyman
2014-05-12 17:36 ` Thomas Petazzoni
2014-05-13 8:24 ` Mathias Nyman
2014-05-11 18:17 ` [PATCHv5 09/20] Documentation: dt-bindings: update xhci-platform DT binding Thomas Petazzoni
2014-05-12 17:38 ` Mathias Nyman
2014-05-11 18:17 ` [PATCHv5 10/20] phy: add support for USB cluster on the Armada 375 SoC Thomas Petazzoni
2014-05-12 14:57 ` Gregory CLEMENT
2014-05-13 5:53 ` Kishon Vijay Abraham I
2014-05-13 8:06 ` Gregory CLEMENT
2014-05-13 9:41 ` Gregory CLEMENT
2014-05-14 14:08 ` Gregory CLEMENT
2014-05-14 14:27 ` Kishon Vijay Abraham I
2014-05-14 15:35 ` Gregory CLEMENT
2014-05-15 7:01 ` Gregory CLEMENT
2014-05-15 9:01 ` Kishon Vijay Abraham I
2014-05-15 9:35 ` Gregory CLEMENT
2014-05-15 9:38 ` Kishon Vijay Abraham I
2014-05-11 18:17 ` [PATCHv5 11/20] Documentation: dt-bindings: document the Armada 375 USB cluster binding Thomas Petazzoni
2014-05-11 18:18 ` [PATCHv5 12/20] ARM: mvebu: add USB3 support for Armada 38x Thomas Petazzoni
2014-05-11 18:18 ` [PATCHv5 13/20] ARM: mvebu: add USB3 support for Armada 375 Thomas Petazzoni
2014-05-11 18:18 ` [PATCHv5 14/20] ARM: configs: enable XHCI mvebu support in mvebu_v7_defconfig Thomas Petazzoni
2014-05-11 18:18 ` [PATCHv5 15/20] ARM: configs: enable XHCI mvebu support in multi_v7_defconfig Thomas Petazzoni
2014-05-11 18:18 ` [PATCHv5 16/20] ARM: mvebu: add Device Tree description of xHCI controllers on Armada 38x Thomas Petazzoni
2014-05-11 18:18 ` [PATCHv5 17/20] ARM: mvebu: add Device Tree description of the EHCI controller " Thomas Petazzoni
2014-05-11 18:18 ` [PATCHv5 18/20] ARM: mvebu: add Device Tree description of USB cluster controller on Armada 375 Thomas Petazzoni
2014-05-11 18:18 ` [PATCHv5 19/20] ARM: mvebu: add Device Tree description of the xHCI " Thomas Petazzoni
2014-05-11 18:18 ` [PATCHv5 20/20] ARM: mvebu: add Device Tree description of the EHCI " Thomas Petazzoni
2014-05-12 14:29 ` [PATCHv5 00/20] USB support for Armada 38x and " Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140512173702.GG31882@saruman.home \
--to=balbi@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).