linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: mturquette@linaro.org (Mike Turquette)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL 1/4] Samsung clock Exynos5260 support for v3.16
Date: Wed, 14 May 2014 13:13:13 -0700	[thread overview]
Message-ID: <20140514201313.19795.35617@quantum> (raw)
In-Reply-To: <5373CB1A.1040801@samsung.com>

Quoting Kukjin Kim (2014-05-14 12:59:22)
> On 05/15/14 03:03, Tomasz Figa wrote:
> 
> Hi Mike,
> 
> I've talked to Tomasz about current samsung related clock stuff. Since 
> they are mostly having dependency on samsung tree now not clock core 
> stuff, so would be better if it could be sent to upstream via samsung 
> tree. And as you know, updating arch/arm/ and clock stuff are usually 
> required for adding new SoC or supporting CCF newly...

The Samsung clk pull requests only touch two arch/arm Kconfig files and
one dtsi file. That's not a lot of arch/arm churn. Is there a strong
reason that this needs to go through the samsung/arm-soc trees?
Otherwise it should continue to go through the clk tree.

> 
> How do you think? Basically I need your agreement for it.

Based on the above pull requests I do not see the need for changing how
code gets merged.

Regards,
Mike

> 
> Thanks,
> Kukjin
> 
> 
> > The following changes since commit 2916f9a2c6d9200b4c840a613cd1fa1dad04240f:
> >
> >    ARM: S3C24XX: remove SAMSUNG_CLOCK remnants after ccf conversion (2014-05-13 08:00:46 +0900)
> >
> > are available in the git repository at:
> >
> >    git://git.kernel.org/pub/scm/linux/kernel/git/tfiga/samsung-clk.git for_3.16/exynos5260
> >
> > for you to fetch changes up to d39e55e06371c1ba9d11f4a17a56a0f925d12415:
> >
> >    clk/exynos5260: add clock file for exynos5260 (2014-05-14 19:16:55 +0200)
> >
> > ----------------------------------------------------------------
> >
> > Samsung clock Exynos5260 support for v3.16.
> >
> > This pull request contains patches preparing Samsung Common Clock Framework
> > helpers to support Exynos5260 by adding support for multiple clock providers
> > and then adding clock driver for Exynos5260.
> >
> > ----------------------------------------------------------------
> > Pankaj Dubey (1):
> >        clk/samsung: add support for pll2550xx
> >
> > Rahul Sharma (4):
> >        clk/samsung: add support for multiple clock providers
> >        clk/samsung: add support for pll2650xx
> >        clk/exynos5260: add macros and documentation for exynos5260
> >        clk/exynos5260: add clock file for exynos5260
> >
> >   .../devicetree/bindings/clock/exynos5260-clock.txt |  190 ++
> >   drivers/clk/samsung/Makefile                       |    1 +
> >   drivers/clk/samsung/clk-exynos4.c                  |   47 +-
> >   drivers/clk/samsung/clk-exynos5250.c               |   25 +-
> >   drivers/clk/samsung/clk-exynos5260.c               | 1980 ++++++++++++++++++++
> >   drivers/clk/samsung/clk-exynos5260.h               |  459 +++++
> >   drivers/clk/samsung/clk-exynos5420.c               |   24 +-
> >   drivers/clk/samsung/clk-exynos5440.c               |   18 +-
> >   drivers/clk/samsung/clk-pll.c                      |  223 ++-
> >   drivers/clk/samsung/clk-pll.h                      |    2 +
> >   drivers/clk/samsung/clk-s3c2410.c                  |   51 +-
> >   drivers/clk/samsung/clk-s3c2412.c                  |   29 +-
> >   drivers/clk/samsung/clk-s3c2443.c                  |   46 +-
> >   drivers/clk/samsung/clk-s3c64xx.c                  |   44 +-
> >   drivers/clk/samsung/clk.c                          |  114 +-
> >   drivers/clk/samsung/clk.h                          |   72 +-
> >   include/dt-bindings/clock/exynos5260-clk.h         |  469 +++++
> >   17 files changed, 3589 insertions(+), 205 deletions(-)
> >   create mode 100644 Documentation/devicetree/bindings/clock/exynos5260-clock.txt
> >   create mode 100644 drivers/clk/samsung/clk-exynos5260.c
> >   create mode 100644 drivers/clk/samsung/clk-exynos5260.h
> >   create mode 100644 include/dt-bindings/clock/exynos5260-clk.h
> > --

  reply	other threads:[~2014-05-14 20:13 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-14 18:03 [GIT PULL 1/4] Samsung clock Exynos5260 support for v3.16 Tomasz Figa
2014-05-14 18:03 ` [GIT PULL 2/4] Samsung clock non-critical fixes " Tomasz Figa
2014-05-14 18:03 ` [GIT PULL 3/4] Samsung clock clean-up " Tomasz Figa
2014-05-14 18:03 ` [GIT PULL 4/4] Samsung clock support for Exynos3250 " Tomasz Figa
2014-05-14 19:59 ` [GIT PULL 1/4] Samsung clock Exynos5260 support " Kukjin Kim
2014-05-14 20:13   ` Mike Turquette [this message]
2014-05-14 20:20     ` Tomasz Figa
2014-05-14 22:07       ` Mike Turquette
2014-05-14 22:16         ` Tomasz Figa
2014-05-15 21:11           ` Kukjin Kim
2014-05-16 23:57             ` Kukjin Kim

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140514201313.19795.35617@quantum \
    --to=mturquette@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).