[PATCH 1/9] ARM: STi: DT: STiH416: 416 DT Entry for clockgen A0/1/10/11/12

[lee.jones@linaro.org (Lee Jones)]

On Wed, 14 May 2014, Maxime Coquelin wrote:

> Hi Lee,
> 
> On 05/08/2014 10:03 AM, Lee Jones wrote:
> >>>>Patch adds DT entries for clockgen A0/1/10/11/12
> >>>>
> >>>>Signed-off-by: Pankaj Dev <pankaj.dev@st.com>
> >>>>Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
> >>>>---
> >>>>  arch/arm/boot/dts/stih416-clks.h     |  15 ++
> >>>
> >>>This should live in include/dt-bindings/clk
> >>>
> >>include/dt-bindings/clk or  include/dt-bindings/clock ?
> >
> >I have no idea what the difference between the two are.  I guess you
> >are in a better position to answer that.  My point was just that the
> >includes should be in the include directory, rather than being held
> >locally in the 'dts' directory.
> 
> Even if these .h files are only used by the DTS files??
> 
> There are some .h files for pincfg related stuff, shouldn't we do
> the same in this case?

I believe so.  There are a few include files which are only referenced
from DTS(I) files.  I would be cautious about needlessly overloading
arch/arm/boot/dts with files which do not need to be there.  This is
my personal opinion though, perhaps the DT guys have other ideas.

> >>>>  arch/arm/boot/dts/stih416-clock.dtsi | 477 ++++++++++++++++++++++++++++++++++
> >>>>  arch/arm/boot/dts/stih416.dtsi       |  10 +-
> >>>>  3 files changed, 497 insertions(+), 5 deletions(-)
> >>>>  create mode 100644 arch/arm/boot/dts/stih416-clks.h
> >

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog