From mboxrd@z Thu Jan 1 00:00:00 1970 From: lee.jones@linaro.org (Lee Jones) Date: Tue, 20 May 2014 16:12:05 +0100 Subject: [PATCH 3/7] mfd: twl4030-power: Add generic reset configuration In-Reply-To: <1400031250-29542-4-git-send-email-tony@atomide.com> References: <1400031250-29542-1-git-send-email-tony@atomide.com> <1400031250-29542-4-git-send-email-tony@atomide.com> Message-ID: <20140520151205.GY24991@lee--X1> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org > The twl4030 PMIC needs to be configured properly for things like > warm reset and deeper idle states so the PMIC manages the regulators > properly based on the hardware triggers from the SoC. > > For example, when rebooting an OMAP3530 at 125 MHz, it hangs. > With this patch, TWL4030 will be reset when a warm reset occures. > This way the OMAP3530 does not hang on reboot. > > Let's use this as the default when compatible = "ti,twl4030-power". > Other more complicated configurations can be added to the driver > based on other compatible flags. > > Based on earlier patch by Matthias Brugger : > > http://lists.infradead.org/pipermail/linux-arm-kernel/2013-January/144165.html > > And Lesly A M : > > https://github.com/openembedded/openembedded/blob/master/recipes/linux/linux-omap-2.6.39/mfd/0010-MFD-TWL4030-power-scripts-for-OMAP3-boards.patch > > For more information about twl4030 configuration for the > "power scripts" see: > > http://www.omappedia.com/wiki/TWL4030_power_scripts Do you really want this bumph in the commit log? > Cc: Matthias Brugger > Cc: Robert Nelson > Cc: Peter De Schrijver > Cc: Samuel Ortiz > Cc: Lee Jones > Signed-off-by: Tony Lindgren > --- > .../devicetree/bindings/mfd/twl4030-power.txt | 7 +- > drivers/mfd/twl4030-power.c | 99 +++++++++++++++++++--- > include/linux/i2c/twl.h | 3 + > 3 files changed, 95 insertions(+), 14 deletions(-) > > diff --git a/Documentation/devicetree/bindings/mfd/twl4030-power.txt b/Documentation/devicetree/bindings/mfd/twl4030-power.txt > index 8e15ec3..b906116 100644 > --- a/Documentation/devicetree/bindings/mfd/twl4030-power.txt > +++ b/Documentation/devicetree/bindings/mfd/twl4030-power.txt > @@ -5,7 +5,12 @@ to control the power resources, including power scripts. For now, the > binding only supports the complete shutdown of the system after poweroff. > > Required properties: > -- compatible : must be "ti,twl4030-power" > +- compatible : must be one of the following > + "ti,twl4030-power" > + "ti,twl4030-power-reset" > + > +The use of ti,twl4030-power-reset is recommended at least on > +3530 that needs a special configuration for warm reset to work. > > Optional properties: > - ti,use_poweroff: With this flag, the chip will initiates an ACTIVE-to-OFF or > diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c > index c0e4fc3..b61b725 100644 > --- a/drivers/mfd/twl4030-power.c > +++ b/drivers/mfd/twl4030-power.c > @@ -29,6 +29,7 @@ > #include > #include > #include > +#include > > #include > > @@ -128,6 +129,30 @@ static u8 res_config_addrs[] = { > [RES_MAIN_REF] = 0x94, > }; > > +/* > + * Usable values for .remap_sleep and .remap_off > + * Based on table "5.3.3 Resource Operating modes" > + */ > +enum { > + TWL_REMAP_OFF = 0, > + TWL_REMAP_SLEEP = 8, > + TWL_REMAP_ACTIVE = 9, > +}; > + > +#define TWL_RESOURCE_ON(res) \ > + { MSG_SINGULAR(DEV_GRP_NULL, (res), RES_STATE_ACTIVE), 0x02 } Was ist das? Magic, floating, fluffy numbers. > +#define TWL_RESOURCE_OFF(res) \ > + { MSG_SINGULAR(DEV_GRP_NULL, (res), RES_STATE_OFF), 0x02 } > +#define TWL_RESOURCE_RESET(res) \ > + { MSG_SINGULAR(DEV_GRP_NULL, (res), RES_STATE_WRST), 0x02 } > +#define TWL_RESOURCE_GROUP_RESET(group, type1, type2) \ > + { MSG_BROADCAST(DEV_GRP_NULL, (group), (type1), (type2), \ > + RES_STATE_WRST), 0x02 } > +#define TWL_REMAP_SLEEP(res, devgrp, typ, typ2) \ > + { .resource = (res), .devgroup = (devgrp), \ > + .type = (typ), .type2 = (typ2), \ > + .remap_off = TWL_REMAP_OFF, .remap_sleep = TWL_REMAP_SLEEP, } > + > static int twl4030_write_script_byte(u8 address, u8 byte) > { > int err; > @@ -502,7 +527,8 @@ int twl4030_remove_script(u8 flags) > return err; > } > > -static int twl4030_power_configure_scripts(struct twl4030_power_data *pdata) > +static int > +twl4030_power_configure_scripts(const struct twl4030_power_data *pdata) Is this doing anything besides some sneaky clean-up? If not, it might be worth mentioning that you're taking advantage of these changes to conduct such activities. > { > int err; > int i; > @@ -518,7 +544,8 @@ static int twl4030_power_configure_scripts(struct twl4030_power_data *pdata) > return 0; > } > > -static int twl4030_power_configure_resources(struct twl4030_power_data *pdata) > +static int > +twl4030_power_configure_resources(const struct twl4030_power_data *pdata) Ditto. > { > struct twl4030_resconfig *resconfig = pdata->resource_config; > int err; > @@ -550,7 +577,7 @@ void twl4030_power_off(void) > pr_err("TWL4030 Unable to power off\n"); > } > > -static bool twl4030_power_use_poweroff(struct twl4030_power_data *pdata, > +static bool twl4030_power_use_poweroff(const struct twl4030_power_data *pdata, > struct device_node *node) Etc. [...] -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org ? Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog