[PATCH v2 0/7] mfd: twl4030-power: Enable off-idle configuration when booted with device tree

[lee.jones@linaro.org (Lee Jones)]

> Here's an updated set of patches to enable low-power idle modes
> for some omap3 boards when booted with device tree.
> 
> This series when applied on top of the patches in tread                                                                                                       
> "[PATCH 00/11] Fixes for omap PM for making omap3 DT only",
> or omap-for-v3.16/pm branch.
> 
> Lee, if these patches look OK to you, please feel free to 
> pick them, preferrably to the immutable branch you already
> have set up so I can also merge them in to be able to have
> things working in my branch properly for PM.

Okay, it looks like this series is good to go now.  If you believe so
too, give me the nod and I'll apply.

> Tony Lindgren (7):
>   mfd: twl4030-power: Fix hang on reboot if sleep configuration was
>     loaded earlier
>   mfd: twl4030-power: Fix some defines for SW_EVENTS
>   mfd: twl4030-power: Add generic reset configuration
>   mfd: twl4030-power: Add recommended idle configuration
>   mfd: twl4030-power: Add support for board specific configuration
>   mfd: twl4030power: Add a configuration to turn off oscillator during
>     off-idle
>   ARM: dts: Enable twl4030 off-idle configuration for selected omaps
> 
>  .../devicetree/bindings/mfd/twl4030-power.txt      |  17 +-
>  arch/arm/boot/dts/omap3-beagle-xm.dts              |   6 +
>  arch/arm/boot/dts/omap3-evm-common.dtsi            |   7 +
>  arch/arm/boot/dts/omap3-n900.dts                   |   5 +
>  drivers/mfd/twl4030-power.c                        | 269 +++++++++++++++++++--
>  include/linux/i2c/twl.h                            |   4 +
>  6 files changed, 284 insertions(+), 24 deletions(-)
> 

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog