From mboxrd@z Thu Jan  1 00:00:00 1970
From: lee.jones@linaro.org (Lee Jones)
Date: Wed, 21 May 2014 10:29:13 +0100
Subject: [PATCH v2 4/4] ARM: dts: bcm590xx: add support for GPLDO and
 VBUS regulators
In-Reply-To: <1398295293-11033-5-git-send-email-mporter@linaro.org>
References: <1398295293-11033-1-git-send-email-mporter@linaro.org>
 <1398295293-11033-5-git-send-email-mporter@linaro.org>
Message-ID: <20140521092913.GG6679@lee--X1>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

> Adds additional nodes to support GPLDO1-6 and VBUS regulators which
> are now supported in the bcm590xx regulator driver.
> 
> Signed-off-by: Matt Porter <mporter@linaro.org>
> ---
>  arch/arm/boot/dts/bcm59056.dtsi | 21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)

I'm not going to apply this with the rest of the set.  It will have to
go in via your normal arch/arm route.

> diff --git a/arch/arm/boot/dts/bcm59056.dtsi b/arch/arm/boot/dts/bcm59056.dtsi
> index dfadaaa..066adfb 100644
> --- a/arch/arm/boot/dts/bcm59056.dtsi
> +++ b/arch/arm/boot/dts/bcm59056.dtsi
> @@ -70,5 +70,26 @@
>  
>  		vsr_reg: vsr {
>  		};
> +
> +		gpldo1_reg: gpldo1 {
> +		};

What do these empty nodes do in any case?

Don't you at least need a status property in there or something?

> +		gpldo2_reg: gpldo2 {
> +		};
> +
> +		gpldo3_reg: gpldo3 {
> +		};
> +
> +		gpldo4_reg: gpldo4 {
> +		};
> +
> +		gpldo5_reg: gpldo5 {
> +		};
> +
> +		gpldo6_reg: gpldo6 {
> +		};
> +
> +		vbus_reg: vbus {
> +		};
>  	};
>  };

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog