From mboxrd@z Thu Jan  1 00:00:00 1970
From: horms@verge.net.au (Simon Horman)
Date: Wed, 28 May 2014 12:52:03 +0900
Subject: [PATCH v8 0/3] R-Car Gen2 PCIe host driver
In-Reply-To: <20140528024820.GL11907@google.com>
References: <1399892270-25021-1-git-send-email-phil.edworthy@renesas.com>
 <20140528024820.GL11907@google.com>
Message-ID: <20140528035203.GA28249@verge.net.au>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Tue, May 27, 2014 at 08:48:20PM -0600, Bjorn Helgaas wrote:
> On Mon, May 12, 2014 at 11:57:47AM +0100, Phil Edworthy wrote:
> > This is version 8 of a PCIe Host driver for the R-Car Gen2 devices,
> > i.e. R-Car H2 (r8a7790) and R-Car M2 (r8a7791).
> > 
> > v8:
> >  - Platform changes removed from this patch set
> >  - Moved header file contents into c file
> >  - Formatting cleaned up
> >  - Remove bus/dev/func range checks for config access
> >  - Add comment about config access serialization
> >  - Made rcar_pcie_setup_window() return void as no errors possible
> >  - Remove unused register definitions
> >  - Removed __init markers to fix section mismatches
> >  - Add explicit bus number range
> >  - Get the root bus nr from config writes instead of sys->busnr
> >  - Use PCI domains
> >  - Removed unused variable in rcar_msi_free()
> >  - Split interrupt bindings into separate cells
> > 
> > v7:
> >  - Change binding description of clocks to 'clock specifiers'
> > 
> > v6:
> >  - Correct DT bindings description for reg and clocks
> >  - Split device and board DT changes
> >  - Add shmobile to subject for shmobile DT patches
> >  - Don't check MSI irq number is valid, as upper level checks this
> >  - Change "Unexpected MSI" msg to debug level
> >  - Reword "Unexpected MSI" comment so that it's one line
> >  - Remove patch that adds HAVE_ARM_ARCH_TIMER to koelsch defconfig as not needed
> > 
> > v5:
> >  - Use module_platform_driver instead of subsys_initcall
> >  - Use the of_device_id data field for HW init function
> >  - Init hw_pci struct in declaration
> >  - Renesas SoC compatible string has peripheral before device name
> >  - Add PCIe bus clock reference
> >  - Use dma-ranges property to specify inbound memory regions
> >  - Support multiple IO windows and correct resources
> >  - Return IRQ_NONE from MSI isr when there is no pending MSI
> >  - Add additional interrupt bindings
> > 
> > v4:
> >  - Use runtime PM properly
> > 
> > Phil Edworthy (3):
> >   PCI: host: rcar: Add Renesas R-Car PCIe driver
> >   PCI: host: rcar: Add MSI support
> >   dt-bindings: pci: rcar pcie device tree bindings
> > 
> >  Documentation/devicetree/bindings/pci/rcar-pci.txt |   47 +
> >  drivers/pci/host/Kconfig                           |    6 +
> >  drivers/pci/host/Makefile                          |    1 +
> >  drivers/pci/host/pcie-rcar.c                       | 1008 ++++++++++++++++++++
> >  4 files changed, 1062 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/pci/rcar-pci.txt
> >  create mode 100644 drivers/pci/host/pcie-rcar.c
> 
> Applied with Simon's ack to pci/host-rcar for v3.16, thanks!

Thanks!