[PATCH] irqchip: nvic: Use the generic noop function

[PATCH] irqchip: nvic: Use the generic noop function

[Daniel Thompson]

Using the generic function saves looking up this custom one in a source
navigator.

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
---
 drivers/irqchip/irq-nvic.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/drivers/irqchip/irq-nvic.c b/drivers/irqchip/irq-nvic.c
index 70bdf6e..c935c61 100644
--- a/drivers/irqchip/irq-nvic.c
+++ b/drivers/irqchip/irq-nvic.c
@@ -49,14 +49,6 @@ nvic_handle_irq(irq_hw_number_t hwirq, struct pt_regs *regs)
 	handle_IRQ(irq, regs);
 }
 
-static void nvic_eoi(struct irq_data *d)
-{
-	/*
-	 * This is a no-op as end of interrupt is signaled by the exception
-	 * return sequence.
-	 */
-}
-
 static int __init nvic_of_init(struct device_node *node,
 			       struct device_node *parent)
 {
@@ -102,7 +94,7 @@ static int __init nvic_of_init(struct device_node *node,
 		gc->chip_types[0].regs.disable = NVIC_ICER;
 		gc->chip_types[0].chip.irq_mask = irq_gc_mask_disable_reg;
 		gc->chip_types[0].chip.irq_unmask = irq_gc_unmask_enable_reg;
-		gc->chip_types[0].chip.irq_eoi = nvic_eoi;
+		gc->chip_types[0].chip.irq_eoi = irq_gc_noop;
 
 		/* disable interrupts */
 		writel_relaxed(~0, gc->reg_base + NVIC_ICER);
-- 
1.9.0

[PATCH] irqchip: nvic: Use the generic noop function

[Uwe Kleine-König]

On Wed, Jun 04, 2014 at 01:37:05PM +0100, Daniel Thompson wrote:
> Using the generic function saves looking up this custom one in a source
> navigator.
> 
> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>

thanks
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-K?nig            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[PATCH] irqchip: nvic: Use the generic noop function

[Thomas Gleixner]

On Wed, 4 Jun 2014, Daniel Thompson wrote:

> Using the generic function saves looking up this custom one in a source
> navigator.
> 
> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Jason Cooper <jason@lakedaemon.net>
> ---
>  drivers/irqchip/irq-nvic.c | 10 +---------
>  1 file changed, 1 insertion(+), 9 deletions(-)
> 
> diff --git a/drivers/irqchip/irq-nvic.c b/drivers/irqchip/irq-nvic.c
> index 70bdf6e..c935c61 100644
> --- a/drivers/irqchip/irq-nvic.c
> +++ b/drivers/irqchip/irq-nvic.c
> @@ -49,14 +49,6 @@ nvic_handle_irq(irq_hw_number_t hwirq, struct pt_regs *regs)
>  	handle_IRQ(irq, regs);
>  }
>  
> -static void nvic_eoi(struct irq_data *d)
> -{
> -	/*
> -	 * This is a no-op as end of interrupt is signaled by the exception
> -	 * return sequence.
> -	 */

You shred that information. Please move the comment above the
irq_gc_noop assignment.

Thanks,

	tglx

[PATCH v2] irqchip: nvic: Use the generic noop function

[Daniel Thompson]

Using the generic function saves looking up this custom one in a source
navigator.

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
---
 drivers/irqchip/irq-nvic.c | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

diff --git a/drivers/irqchip/irq-nvic.c b/drivers/irqchip/irq-nvic.c
index 70bdf6e..4ff0805 100644
--- a/drivers/irqchip/irq-nvic.c
+++ b/drivers/irqchip/irq-nvic.c
@@ -49,14 +49,6 @@ nvic_handle_irq(irq_hw_number_t hwirq, struct pt_regs *regs)
 	handle_IRQ(irq, regs);
 }
 
-static void nvic_eoi(struct irq_data *d)
-{
-	/*
-	 * This is a no-op as end of interrupt is signaled by the exception
-	 * return sequence.
-	 */
-}
-
 static int __init nvic_of_init(struct device_node *node,
 			       struct device_node *parent)
 {
@@ -102,7 +94,10 @@ static int __init nvic_of_init(struct device_node *node,
 		gc->chip_types[0].regs.disable = NVIC_ICER;
 		gc->chip_types[0].chip.irq_mask = irq_gc_mask_disable_reg;
 		gc->chip_types[0].chip.irq_unmask = irq_gc_unmask_enable_reg;
-		gc->chip_types[0].chip.irq_eoi = nvic_eoi;
+		/* This is a no-op as end of interrupt is signaled by the
+		 * exception return sequence.
+		 */
+		gc->chip_types[0].chip.irq_eoi = irq_gc_noop;
 
 		/* disable interrupts */
 		writel_relaxed(~0, gc->reg_base + NVIC_ICER);
-- 
1.9.0

[PATCH v2] irqchip: nvic: Use the generic noop function

[Jason Cooper]

On Wed, Jun 04, 2014 at 04:01:52PM +0100, Daniel Thompson wrote:
> Using the generic function saves looking up this custom one in a source
> navigator.
> 
> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Jason Cooper <jason@lakedaemon.net>
> ---
>  drivers/irqchip/irq-nvic.c | 13 ++++---------
>  1 file changed, 4 insertions(+), 9 deletions(-)

Applied to irqchip/core with Uwe's Ack.

thx,

Jason.