From: peter.griffin@linaro.org (Peter Griffin)
To: linux-arm-kernel@lists.infradead.org
Subject: [STLinux Kernel] [PATCH RESEND 05/12] drivers: clk: st: STiH407: Support for clockgenA0
Date: Thu, 5 Jun 2014 12:57:14 +0100 [thread overview]
Message-ID: <20140605115714.GA2294@griffinp-ThinkPad-X1-Carbon-2nd> (raw)
In-Reply-To: <1401892320-18211-6-git-send-email-gabriel.fernandez@linaro.org>
Hi Gabi,
On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:
> The patch added support for DT registration of ClockGenA0
> It includes c32 type PLL.
>
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
> Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
> ---
> drivers/clk/st/clkgen-pll.c | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/drivers/clk/st/clkgen-pll.c b/drivers/clk/st/clkgen-pll.c
> index d8b9b1a..6916cfa 100644
> --- a/drivers/clk/st/clkgen-pll.c
> +++ b/drivers/clk/st/clkgen-pll.c
> @@ -180,6 +180,18 @@ static struct clkgen_pll_data st_pll1200c32_gpu_416 = {
> .ops = &st_pll1200c32_ops,
> };
>
> +static struct clkgen_pll_data st_pll3200c32_407_a0 = {
> + /* 407 A0 */
> + .pdn_status = CLKGEN_FIELD(0x2a0, 0x1, 8),
> + .locked_status = CLKGEN_FIELD(0x2a0, 0x1, 24),
> + .ndiv = CLKGEN_FIELD(0x2a4, C32_NDIV_MASK, 16),
> + .idf = CLKGEN_FIELD(0x2a4, C32_IDF_MASK, 0x0),
> + .num_odfs = 1,
> + .odf = { CLKGEN_FIELD(0x2b4, C32_ODF_MASK, 0) },
> + .odf_gate = { CLKGEN_FIELD(0x2b4, 0x1, 6) },
> + .ops = &stm_pll3200c32_ops,
> +};
> +
> /**
I think these could be 'static const' as well, with some fixups in the function protoypes
which use it.
Apart from that : -
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Regards,
Peter
next prev parent reply other threads:[~2014-06-05 11:57 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-04 14:31 [PATCH RESEND 00/12] Add Flexgen Clock support Gabriel FERNANDEZ
2014-06-04 14:31 ` [PATCH RESEND 01/12] clk: st: Update ST clock binding documentation Gabriel FERNANDEZ
2014-06-05 8:48 ` [STLinux Kernel] " Peter Griffin
2014-06-04 14:31 ` [PATCH RESEND 02/12] clk: st: Adds Flexgen clock binding Gabriel FERNANDEZ
2014-06-05 7:51 ` [STLinux Kernel] " Peter Griffin
2014-06-04 14:31 ` [PATCH RESEND 03/12] drivers: clk: st: STiH407: Support for Flexgen Clocks Gabriel FERNANDEZ
2014-06-05 8:17 ` [STLinux Kernel] " Peter Griffin
2014-06-04 14:31 ` [PATCH RESEND 04/12] drivers: clk: st: STiH407: Support for A9 MUX Clocks Gabriel FERNANDEZ
2014-06-05 8:55 ` [STLinux Kernel] " Peter Griffin
2014-06-05 9:00 ` Peter Griffin
2014-06-04 14:31 ` [PATCH RESEND 05/12] drivers: clk: st: STiH407: Support for clockgenA0 Gabriel FERNANDEZ
2014-06-05 11:57 ` Peter Griffin [this message]
2014-06-27 11:47 ` [STLinux Kernel] " Gabriel Fernandez
2014-06-04 14:31 ` [PATCH RESEND 06/12] drivers: clk: st: Add polarity bit indication Gabriel FERNANDEZ
2014-06-05 7:45 ` [STLinux Kernel] " Peter Griffin
2014-06-05 7:51 ` Gabriel Fernandez
2014-06-04 14:31 ` [PATCH RESEND 07/12] drivers: clk: st: Add quadfs reset handling Gabriel FERNANDEZ
2014-06-05 11:16 ` [STLinux Kernel] " Peter Griffin
2014-06-04 14:31 ` [PATCH RESEND 08/12] drivers: clk: st: STiH407: Support for clockgenC0 Gabriel FERNANDEZ
2014-06-05 11:32 ` [STLinux Kernel] " Peter Griffin
2014-06-04 14:31 ` [PATCH RESEND 09/12] drivers: clk: st: STiH407: Support for clockgenD0/D2/D3 Gabriel FERNANDEZ
2014-06-05 8:58 ` [STLinux Kernel] " Peter Griffin
2014-06-04 14:31 ` [PATCH RESEND 10/12] drivers: clk: st: STiH407: Support for clockgenA9 Gabriel FERNANDEZ
2014-06-05 9:01 ` [STLinux Kernel] " Peter Griffin
2014-06-04 14:31 ` [PATCH RESEND 11/12] drivers: clk: st: Update frequency tables for fs660c32 and fs432c65 Gabriel FERNANDEZ
2014-06-05 11:13 ` [STLinux Kernel] " Peter Griffin
2014-06-27 11:50 ` Gabriel Fernandez
2014-06-04 14:32 ` [PATCH RESEND 12/12] drivers: clk: st: Use round to closest divider flag Gabriel FERNANDEZ
2014-06-05 11:57 ` [STLinux Kernel] " Peter Griffin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140605115714.GA2294@griffinp-ThinkPad-X1-Carbon-2nd \
--to=peter.griffin@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox