[PATCH v2 1/3] arm: multi_v7: enable igb, stmpe, lm95245, pwm leds

[PATCH v2 1/3] arm: multi_v7: enable igb, stmpe, lm95245, pwm leds

[Marcel Ziswiler]

The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 resp.
i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, PWM
LEDs generically accessible from user space and an LM95245 temperature
sensor chip. The later three can also be found on the Colibri T30
module.

While at it move the NEON entry down to its proper place to have it all
nicely ordered again.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
---
Changes since v1:
- Forget about spidev for now.

 arch/arm/configs/multi_v7_defconfig |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 19dbddb..b0b996e 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -66,7 +66,6 @@ CONFIG_ARCH_VEXPRESS=y
 CONFIG_ARCH_VEXPRESS_CA9X4=y
 CONFIG_ARCH_WM8850=y
 CONFIG_ARCH_ZYNQ=y
-CONFIG_NEON=y
 CONFIG_TRUSTED_FOUNDATIONS=y
 CONFIG_PCI=y
 CONFIG_PCI_MSI=y
@@ -83,6 +82,7 @@ CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_STAT_DETAILS=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_IDLE=y
+CONFIG_NEON=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -134,6 +134,7 @@ CONFIG_NETDEVICES=y
 CONFIG_SUN4I_EMAC=y
 CONFIG_MACB=y
 CONFIG_NET_CALXEDA_XGMAC=y
+CONFIG_IGB=y
 CONFIG_MV643XX_ETH=y
 CONFIG_MVNETA=y
 CONFIG_KS8851=y
@@ -157,6 +158,8 @@ CONFIG_KEYBOARD_TEGRA=y
 CONFIG_KEYBOARD_SPEAR=y
 CONFIG_KEYBOARD_CROS_EC=y
 CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_STMPE=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_MPU3050=y
 CONFIG_SERIO_AMBAKMI=y
@@ -222,6 +225,7 @@ CONFIG_POWER_RESET_AS3722=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_POWER_RESET_SUN6I=y
 CONFIG_SENSORS_LM90=y
+CONFIG_SENSORS_LM95245=y
 CONFIG_THERMAL=y
 CONFIG_DOVE_THERMAL=y
 CONFIG_ARMADA_THERMAL=y
@@ -233,6 +237,7 @@ CONFIG_MFD_CROS_EC=y
 CONFIG_MFD_CROS_EC_SPI=y
 CONFIG_MFD_MAX8907=y
 CONFIG_MFD_SEC_CORE=y
+CONFIG_MFD_STMPE=y
 CONFIG_MFD_PALMAS=y
 CONFIG_MFD_TPS65090=y
 CONFIG_MFD_TPS6586X=y
@@ -315,6 +320,9 @@ CONFIG_MMC_MVSDIO=y
 CONFIG_MMC_SUNXI=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_EXYNOS=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_PWM=y
 CONFIG_EDAC=y
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_EDAC_HIGHBANK_MC=y
-- 
1.7.9.5

[PATCH v2 1/3] arm: multi_v7: enable igb, stmpe, lm95245, pwm leds

[Stephen Warren]

On 06/09/2014 04:49 PM, Marcel Ziswiler wrote:
> The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 resp.
> i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, PWM
> LEDs generically accessible from user space and an LM95245 temperature
> sensor chip. The later three can also be found on the Colibri T30
> module.
> 
> While at it move the NEON entry down to its proper place to have it all
> nicely ordered again.

Acked-by: Stephen Warren <swarren@nvidia.com>

I assume this will be applied directly to the arm-soc tree.

[PATCH v2 1/3] arm: multi_v7: enable igb, stmpe, lm95245, pwm leds

[Arnd Bergmann]

On Tuesday 10 June 2014, Marcel Ziswiler wrote:
> The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 resp.
> i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, PWM
> LEDs generically accessible from user space and an LM95245 temperature
> sensor chip. The later three can also be found on the Colibri T30
> module.
> 
> While at it move the NEON entry down to its proper place to have it all
> nicely ordered again.
> 
> Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>

Stephen, Thierry,

do you want me to queue it up directly, or do you want to put it into
a tegra fixes branch?

	Arnd

[PATCH v2 1/3] arm: multi_v7: enable igb, stmpe, lm95245, pwm leds

[Stephen Warren]

On 06/13/2014 08:10 AM, Arnd Bergmann wrote:
> On Tuesday 10 June 2014, Marcel Ziswiler wrote:
>> The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 resp.
>> i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, PWM
>> LEDs generically accessible from user space and an LM95245 temperature
>> sensor chip. The later three can also be found on the Colibri T30
>> module.
>>
>> While at it move the NEON entry down to its proper place to have it all
>> nicely ordered again.
>>
>> Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
> 
> Stephen, Thierry,
> 
> do you want me to queue it up directly, or do you want to put it into
> a tegra fixes branch?

Taking this first patch through arm-soc is easiest to avoid conflicts on
the shared file. I'll take 2 and 3 through the Tegra tree.

[PATCH v2 1/3] arm: multi_v7: enable igb, stmpe, lm95245, pwm leds

[Olof Johansson]

On Tue, Jun 10, 2014 at 12:49:50AM +0200, Marcel Ziswiler wrote:
> The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 resp.
> i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, PWM
> LEDs generically accessible from user space and an LM95245 temperature
> sensor chip. The later three can also be found on the Colibri T30
> module.
> 
> While at it move the NEON entry down to its proper place to have it all
> nicely ordered again.
> 
> Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>

Applied for 3.17.


-Olof