From: maxime.ripard@free-electrons.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 17/20] ARM: sunxi: Introduce Allwinner A23 support
Date: Wed, 18 Jun 2014 14:26:46 +0200 [thread overview]
Message-ID: <20140618122646.GS19730@lukather> (raw)
In-Reply-To: <1403016777-15121-18-git-send-email-wens@csie.org>
On Tue, Jun 17, 2014 at 10:52:54PM +0800, Chen-Yu Tsai wrote:
> The Allwinner A23 is a dual-core Cortex-A7-based SoC. It re-uses most of
> the IPs found in previous SoCs, notably the A31.
>
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
> arch/arm/mach-sunxi/Kconfig | 8 ++++++++
> arch/arm/mach-sunxi/sunxi.c | 10 ++++++++++
> 2 files changed, 18 insertions(+)
>
> diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
> index 0fbd4f1..6434e3b 100644
> --- a/arch/arm/mach-sunxi/Kconfig
> +++ b/arch/arm/mach-sunxi/Kconfig
> @@ -35,4 +35,12 @@ config MACH_SUN7I
> select HAVE_ARM_ARCH_TIMER
> select SUN5I_HSTIMER
>
> +config MACH_SUN8I
> + bool "Allwinner A23 (sun8i) SoCs support"
> + default ARCH_SUNXI
> + select ARCH_HAS_RESET_CONTROLLER
> + select ARM_GIC
> + select MFD_SUN6I_PRCM
> + select RESET_CONTROLLER
> +
> endif
> diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
> index 3f9587b..962ff30 100644
> --- a/arch/arm/mach-sunxi/sunxi.c
> +++ b/arch/arm/mach-sunxi/sunxi.c
> @@ -53,3 +53,13 @@ static const char * const sun7i_board_dt_compat[] = {
> DT_MACHINE_START(SUN7I_DT, "Allwinner sun7i (A20) Family")
> .dt_compat = sun7i_board_dt_compat,
> MACHINE_END
> +
> +static const char * const sun8i_board_dt_compat[] = {
> + "allwinner,sun8i-a23",
> + NULL,
> +};
> +
> +DT_MACHINE_START(SUN8I_DT, "Allwinner sun8i (A23) Family")
> + .init_time = sun6i_timer_init,
I haven't seen anything in your code that needed to use this
function. Am I missing something?
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140618/9b3480ee/attachment.sig>
next prev parent reply other threads:[~2014-06-18 12:26 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-17 14:52 [PATCH v2 00/20] ARM: sunxi: Introduce Allwinner A23 (sun8i) support Chen-Yu Tsai
2014-06-17 14:52 ` [PATCH v2 01/20] serial: 8250_dw: Add optional reset control support Chen-Yu Tsai
2014-06-18 9:08 ` Maxime Ripard
2014-06-17 14:52 ` [PATCH v2 02/20] clk: sunxi: register clock gates with clkdev Chen-Yu Tsai
2014-06-17 14:52 ` [PATCH v2 03/20] clk: sunxi: move "ahb_sdram" to protected clock list Chen-Yu Tsai
2014-06-18 9:10 ` Maxime Ripard
2014-06-17 14:52 ` [PATCH v2 04/20] clk: sunxi: Fix gate indexing for sun6i-a31-apb0-gates Chen-Yu Tsai
2014-06-18 9:38 ` Maxime Ripard
2014-06-17 14:52 ` [PATCH v2 05/20] clk: sunxi: Support factor clocks with N multiplier factor starting from 1 Chen-Yu Tsai
2014-06-17 21:23 ` Rob Herring
2014-06-18 9:42 ` Maxime Ripard
2014-06-17 14:52 ` [PATCH v2 06/20] clk: sunxi: Fix rate_recalc for sun6i PLL1 Chen-Yu Tsai
2014-06-17 14:52 ` [PATCH v2 07/20] clk: sunxi: Fix PLL6 calculation on sun6i Chen-Yu Tsai
2014-06-17 14:52 ` [PATCH v2 08/20] ARM: sun6i: DT: Rename PLL6 to PLL6x2 and add fixed-factor-clock for PLL6 Chen-Yu Tsai
2014-06-18 9:57 ` Maxime Ripard
2014-06-17 14:52 ` [PATCH v2 09/20] clk: sunxi: Add sun6i MBUS clock support Chen-Yu Tsai
2014-06-18 10:04 ` Maxime Ripard
2014-06-23 4:44 ` Chen-Yu Tsai
2014-06-17 14:52 ` [PATCH v2 10/20] clk: sunxi: Add support for table-based divider clocks Chen-Yu Tsai
2014-06-18 10:06 ` Maxime Ripard
2014-06-17 14:52 ` [PATCH v2 11/20] clk: sunxi: Add A23 clocks support Chen-Yu Tsai
2014-06-18 10:16 ` Maxime Ripard
2014-06-19 4:07 ` Chen-Yu Tsai
2014-06-17 14:52 ` [PATCH v2 12/20] clk: sunxi: Add A23 APB0 support to sun6i-a31-apb0-clk Chen-Yu Tsai
2014-06-18 10:26 ` Maxime Ripard
2014-06-19 4:33 ` Chen-Yu Tsai
2014-06-19 9:28 ` Maxime Ripard
2014-06-20 6:13 ` [linux-sunxi] " Chen-Yu Tsai
2014-06-25 16:41 ` maxime.ripard
2014-06-17 14:52 ` [PATCH v2 13/20] clk: sunxi: Add A23 specific compatible to sun6i-a31-apb0-gates-clk Chen-Yu Tsai
2014-06-18 10:17 ` Maxime Ripard
2014-06-17 14:52 ` [PATCH v2 14/20] pinctrl: sunxi: Add A23 PIO controller support Chen-Yu Tsai
2014-07-07 13:00 ` Linus Walleij
2014-06-17 14:52 ` [PATCH v2 15/20] pinctrl: sunxi: Add A23 R_PIO " Chen-Yu Tsai
2014-07-07 13:17 ` Linus Walleij
2014-06-17 14:52 ` [PATCH v2 16/20] mfd: sun6i-prcm: Add support for Allwinner A23 PRCM Chen-Yu Tsai
2014-06-18 8:29 ` Lee Jones
2014-06-18 12:24 ` Maxime Ripard
2014-06-20 7:38 ` Chen-Yu Tsai
2014-06-17 14:52 ` [PATCH v2 17/20] ARM: sunxi: Introduce Allwinner A23 support Chen-Yu Tsai
2014-06-18 12:26 ` Maxime Ripard [this message]
2014-06-20 5:56 ` [linux-sunxi] " Chen-Yu Tsai
2014-06-20 5:59 ` Fwd: " Chen-Yu Tsai
2014-06-17 14:52 ` [PATCH v2 18/20] ARM: sunxi: Add earlyprintk support using R_UART (sun6i/sun8i) Chen-Yu Tsai
2014-06-18 12:29 ` Maxime Ripard
2014-06-17 14:52 ` [PATCH v2 19/20] ARM: sunxi: Add Allwinner A23 dtsi Chen-Yu Tsai
2014-06-17 14:52 ` [PATCH v2 20/20] ARM: sun8i: dt: Add Ippo-q8h v5 support Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140618122646.GS19730@lukather \
--to=maxime.ripard@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).