From mboxrd@z Thu Jan 1 00:00:00 1970 From: mpa@pengutronix.de (Markus Pargmann) Date: Wed, 18 Jun 2014 23:19:33 +0200 Subject: [PATCH v11 2/8] ASoC: core: Generic ac97 link reset functions In-Reply-To: <20140618184234.GA27312@sfrouter> References: <1376924761-4054-1-git-send-email-mpa@pengutronix.de> <1376924761-4054-3-git-send-email-mpa@pengutronix.de> <20140618184234.GA27312@sfrouter> Message-ID: <20140618211933.GD32450@pengutronix.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Silvio, On Wed, Jun 18, 2014 at 08:42:34PM +0200, S. Fricke wrote: > > Hi Markus, > > I'm fighting with your ac97 pinctrl configuration per dts. > > > [...] > > +ssi { > > + ... > > + > > + pinctrl-names = "default", "ac97-running", "ac97-reset", "ac97-warm-reset"; > > + pinctrl-0 = <&ac97link_running>; > > + pinctrl-1 = <&ac97link_running>; > > + pinctrl-2 = <&ac97link_reset>; > > + pinctrl-3 = <&ac97link_warm_reset>; > > + ac97-gpios = <&gpio3 20 0 &gpio3 22 0 &gpio3 28 0>; > > I see here the gpios for sync, sdata and reset. On my board I have two sdata > lines (sdata-in and sdata-out) which line should I specify here for this setting? Try to use sdata-out. This is the only data output line. sdata-in is the input to the SoC so we don't have to use this for an AC97 reset. Regards, Markus -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: