linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: shawn.guo@freescale.com (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/7] ARM: dts: ssi device node updates
Date: Fri, 20 Jun 2014 20:33:38 +0800	[thread overview]
Message-ID: <20140620123337.GI28225@dragon> (raw)
In-Reply-To: <1402995995-15098-1-git-send-email-mpa@pengutronix.de>

On Tue, Jun 17, 2014 at 11:06:28AM +0200, Markus Pargmann wrote:
> This series cleans up some old or unnecessary properties from the dts files.
> 
> Patch 1 removes an enabled ssi unit that is not used.

Instead of holding the whole series by waiting ACK from ventana board
maintainer on the first patch, I choose to keep the ssi node and remove
fsl,mode property.  The ssi node can be removed later in another patch
after board maintainer confirms.

> 
> Patch 2 adds ssi DMA properties based on the previous definiton of
> fsl,ssi-dma-events for imx50.
> 
> Patches 3 and 4 remove the old non-generic fsl,ssi-dma-events property. The
> generic dmas property is still present and used.
> 
> Patch 5,6 and 7 remove the fsl,mode properties for ssi units that are
> connected with sgtl5000 cards. The sgtl5000 already configures the connection
> between codec and CPU DAI correctly, so we don't need fsl,mode here.

There are some a number of new boards on my imx/dt branch across
different i.MX series.  Since the last 3 patches are all about board
level files, I just squashed them and made the same change for those
new boards in there.

Also, I updated the patch subject a little bit, primarily on prefix.
And the last one should be about audio cards, not only sgtl5000.  So in
all, the new summary looks like the following.

Markus Pargmann (4):
  ARM: dts: imx50: add ssi dma properties
  ARM: dts: imx5: remove fsl,ssi-dma-events
  ARM: dts: imx6qdl: remove fsl,ssi-dma-events
  ARM: dts: imx: remove ssi fsl,mode for audio cards

 arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts | 1 -
 arch/arm/boot/dts/imx25-pdk.dts                        | 1 -
 arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts | 1 -
 arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi        | 1 -
 arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts | 1 -
 arch/arm/boot/dts/imx50.dtsi                           | 8 ++++++--
 arch/arm/boot/dts/imx51-babbage.dts                    | 1 -
 arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts | 1 -
 arch/arm/boot/dts/imx51.dtsi                           | 3 ---
 arch/arm/boot/dts/imx53-m53evk.dts                     | 1 -
 arch/arm/boot/dts/imx53-mba53.dts                      | 1 -
 arch/arm/boot/dts/imx53-qsb-common.dtsi                | 1 -
 arch/arm/boot/dts/imx53-tx53.dtsi                      | 1 -
 arch/arm/boot/dts/imx53-voipac-bsb.dts                 | 1 -
 arch/arm/boot/dts/imx53.dtsi                           | 3 ---
 arch/arm/boot/dts/imx6dl-riotboard.dts                 | 1 -
 arch/arm/boot/dts/imx6q-gw5400-a.dts                   | 1 -
 arch/arm/boot/dts/imx6qdl-gw52xx.dtsi                  | 1 -
 arch/arm/boot/dts/imx6qdl-gw53xx.dtsi                  | 1 -
 arch/arm/boot/dts/imx6qdl-gw54xx.dtsi                  | 2 --
 arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi              | 1 -
 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi               | 1 -
 arch/arm/boot/dts/imx6qdl-sabresd.dtsi                 | 1 -
 arch/arm/boot/dts/imx6qdl-tx6.dtsi                     | 1 -
 arch/arm/boot/dts/imx6qdl-wandboard.dtsi               | 1 -
 arch/arm/boot/dts/imx6qdl.dtsi                         | 3 ---
 arch/arm/boot/dts/imx6sl-evk.dts                       | 1 -
 27 files changed, 6 insertions(+), 35 deletions(-)

  parent reply	other threads:[~2014-06-20 12:33 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-17  9:06 [PATCH 0/7] ARM: dts: ssi device node updates Markus Pargmann
2014-06-17  9:06 ` [PATCH 1/7] ARM: dts: imx6: ventana, Remove unused ssi2 Markus Pargmann
2014-06-23 20:23   ` Tim Harvey
2014-06-17  9:06 ` [PATCH 2/7] ARM: dts: imx50, add ssi dma properties Markus Pargmann
2014-06-17  9:06 ` [PATCH 3/7] ARM: dts: imx5*, remove fsl,ssi-dma-events Markus Pargmann
2014-06-17  9:06 ` [PATCH 4/7] arm: dts: imx6qdl, " Markus Pargmann
2014-06-17  9:06 ` [PATCH 5/7] ARM: dts: imx2*, remove ssi fsl,mode for sgtl5000 cards Markus Pargmann
2014-06-17  9:06 ` [PATCH 6/7] ARM: dts: imx5*, " Markus Pargmann
2014-06-17  9:06 ` [PATCH 7/7] ARM: dts: imx6*, " Markus Pargmann
2014-06-20 12:33 ` Shawn Guo [this message]
2014-06-23  9:54   ` [PATCH 0/7] ARM: dts: ssi device node updates Markus Pargmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140620123337.GI28225@dragon \
    --to=shawn.guo@freescale.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).