linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: s.trumtrar@pengutronix.de (Steffen Trumtrar)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv6 1/3] devicetree: Addition of the Altera SDRAM controller
Date: Sat, 21 Jun 2014 11:04:46 +0200	[thread overview]
Message-ID: <20140621090446.GA8053@pengutronix.de> (raw)
In-Reply-To: <1403306523-4174-2-git-send-email-tthayer@altera.com>

Hi!

On Fri, Jun 20, 2014 at 06:22:01PM -0500, tthayer at altera.com wrote:
> From: Thor Thayer <tthayer@altera.com>
> 
> Addition of the Altera SDRAM Controller bindings and device tree changes.
> 
> v2: Changes to SoC SDRAM EDAC code.
> 
> v3: Implement code suggestions for SDRAM EDAC code.
> 
> v4: Remove syscon from SDRAM controller bindings.
> 
> v5: No Change, bump version for consistency.
> 
> v6: Only map the ctrlcfg register as syscon.
> 
> Signed-off-by: Thor Thayer <tthayer@altera.com>
> ---
>  .../bindings/arm/altera/socfpga-sdram.txt          |   11 +++++++++++
>  arch/arm/boot/dts/socfpga.dtsi                     |    5 +++++
>  2 files changed, 16 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/arm/altera/socfpga-sdram.txt
> 
> diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram.txt
> new file mode 100644
> index 0000000..5027026
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram.txt
> @@ -0,0 +1,11 @@
> +Altera SOCFPGA SDRAM Controller
> +
> +Required properties:
> +- compatible : "altr,sdr-ctl";
> +- reg : Should contain 1 register ranges(address and length)
> +
> +Example:
> +	sdrctl at ffc25000 {
> +		compatible = "altr,sdr-ctl";
> +		reg = <0xffc25000 0x4>;
> +	};
> diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
> index 4676f25..310292e 100644
> --- a/arch/arm/boot/dts/socfpga.dtsi
> +++ b/arch/arm/boot/dts/socfpga.dtsi
> @@ -682,6 +682,11 @@
>  			clocks = <&l4_sp_clk>;
>  		};
>  
> +		sdrctl at ffc25000 {
> +			compatible = "altr,sdr-ctl", "syscon";

Did you forget to add the syscon to the binding documentation?

> +			reg = <0xffc25000 0x4>;
> +		};
> +
>  		rst: rstmgr at ffd05000 {
>  			compatible = "altr,rst-mgr";
>  			reg = <0xffd05000 0x1000>;

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

  parent reply	other threads:[~2014-06-21  9:04 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-20 23:22 [PATCHv6 1/3] devicetree: Addition of the Altera SDRAM controller tthayer at altera.com
2014-06-20 23:22 ` [PATCHv6 2/3] devicetree: Addition of the Altera SDRAM EDAC tthayer at altera.com
2014-06-21  9:06   ` Steffen Trumtrar
2014-06-22 18:31     ` Thor Thayer
2014-06-20 23:22 ` [PATCHv6 3/3] edac: altera: Add EDAC support for SDRAM Ctlr tthayer at altera.com
2014-06-23 19:13   ` Dinh Nguyen
2014-06-21  9:04 ` Steffen Trumtrar [this message]
2014-06-22 18:31   ` [PATCHv6 1/3] devicetree: Addition of the Altera SDRAM controller Thor Thayer
2014-06-22 18:41     ` Steffen Trumtrar
  -- strict thread matches above, loose matches on Subject: below --
2014-06-20 23:16 Add EDAC support for Altera SDRAM Controller tthayer at altera.com
2014-06-20 23:16 ` [PATCHv6 1/3] devicetree: Addition of the Altera SDRAM controller tthayer at altera.com

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140621090446.GA8053@pengutronix.de \
    --to=s.trumtrar@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).