From mboxrd@z Thu Jan 1 00:00:00 1970 From: jason@lakedaemon.net (Jason Cooper) Date: Tue, 24 Jun 2014 08:56:53 -0400 Subject: [PATCH v3 3/7] irqchip: atmel-aic: add new atmel AIC driver In-Reply-To: <53A74316.5080509@free-electrons.com> References: <1403276487-8792-1-git-send-email-boris.brezillon@free-electrons.com> <1403276487-8792-4-git-send-email-boris.brezillon@free-electrons.com> <53A74316.5080509@free-electrons.com> Message-ID: <20140624125653.GN10202@titan.lakedaemon.net> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Boris, On Sun, Jun 22, 2014 at 10:56:54PM +0200, Boris BREZILLON wrote: > > On 20/06/2014 17:01, Boris BREZILLON wrote: > > Add new atmel AIC (Advanced Interrupt Controller) driver based on the > > generic chip infrastructure. > > > > This driver is only compatible with dt enabled board and replaces the old > > implementation found in arch/arm/mach-at91/irq.c. > > > > Signed-off-by: Boris BREZILLON > > --- > > drivers/irqchip/Kconfig | 7 + > > drivers/irqchip/Makefile | 1 + > > drivers/irqchip/irq-atmel-aic.c | 700 ++++++++++++++++++++++++++++++++++++++++ > > 3 files changed, 708 insertions(+) > > create mode 100644 drivers/irqchip/irq-atmel-aic.c > > > > diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig > > index bbb746e..6a7ad81 100644 > > --- a/drivers/irqchip/Kconfig > > +++ b/drivers/irqchip/Kconfig > > @@ -30,6 +30,13 @@ config ARM_VIC_NR > > The maximum number of VICs available in the system, for > > power management. > > > > [...] > > > + > > +static int at91_aic_common_irq_domain_xlate(struct irq_domain *d, > > This function should be named aic_common_irq_domain_xslate to be > consistent with other function names. > I'll fix that for the next version. Other than this one change, this series looks good wrt to irqchip. When you respin, please adjust the patch subject lines like so: irqchip: atmel-aic: Add new atmel AIC driver Note the capitalization. Also, if you could add Thomas' Ack to the first patch, that would be appreciated. Once you post the new series, I assume it's ok to apply patches 1-3 to irqchip/core, or are there some dependency considerations? thx, Jason.