From: thierry.reding@gmail.com (Thierry Reding)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v14 08/10] drm/panel: Add Eukrea mbimxsd51 displays.
Date: Tue, 24 Jun 2014 23:56:48 +0200 [thread overview]
Message-ID: <20140624215647.GA30143@mithrandir> (raw)
In-Reply-To: <CAL_JsqLbzS9Zh+NK8pfqJ=twQpz0qYfyH4xC3NnvCXBokyx+yQ@mail.gmail.com>
On Tue, Jun 24, 2014 at 02:52:11PM -0500, Rob Herring wrote:
> On Tue, Jun 24, 2014 at 10:06 AM, Russell King - ARM Linux <linux@arm.linux.org.uk> wrote:
[...]
> > On Mon, Jun 16, 2014 at 12:11:22PM +0200, Denis Carikli wrote:
[...]
> >> diff --git a/Documentation/devicetree/bindings/panel/eukrea,mbimxsd51-dvi-vga.txt b/Documentation/devicetree/bindings/panel/eukrea,mbimxsd51-dvi-vga.txt
[...]
> >> @@ -0,0 +1,7 @@
> >> +Eukrea DVI-VGA (640x480 pixels) DVI output.
> >> +
> >> +Required properties:
> >> +- compatible: should be "eukrea,mbimxsd51-dvi-vga"
> >> +
> >> +This binding is compatible with the simple-panel binding, which is specified
> >> +in simple-panel.txt in this directory.
>
> Seems like we could just have a list of compatible strings rather than
> a mostly duplicated file.
We've been doing it this way for all other panels.
> >> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> >> index a251361..adc40a7 100644
> >> --- a/drivers/gpu/drm/panel/panel-simple.c
> >> +++ b/drivers/gpu/drm/panel/panel-simple.c
> >> @@ -403,6 +403,80 @@ static const struct panel_desc edt_etm0700g0dh6 = {
> >> },
> >> };
> >>
> >> +static const struct drm_display_mode eukrea_mbimxsd51_cmoqvga_mode = {
> >> + .clock = 6500,
> >> + .hdisplay = 320,
> >> + .hsync_start = 320 + 38,
> >> + .hsync_end = 320 + 38 + 20,
> >> + .htotal = 320 + 38 + 20 + 30,
> >> + .vdisplay = 240,
> >> + .vsync_start = 240 + 15,
> >> + .vsync_end = 240 + 15 + 4,
> >> + .vtotal = 240 + 15 + 4 + 3,
> >> + .vrefresh = 60,
> >> + .pol_flags = DRM_MODE_FLAG_POL_PIXDATA_NEGEDGE |
> >> + DRM_MODE_FLAG_POL_DE_LOW,
>
> Why aren't you using:
>
> Documentation/devicetree/bindings/video/display-timing.txt
Because it's redundant information. We need to have a compatible for the
panel in the device tree anyway and that already implicitly defines the
display mode.
Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140624/15203d17/attachment.sig>
next prev parent reply other threads:[~2014-06-24 21:56 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-16 10:11 [PATCH v14 01/10] [media] v4l2: add new V4L2_PIX_FMT_RGB666 pixel format Denis Carikli
2014-06-16 10:11 ` [PATCH v14 02/10] imx-drm: Add RGB666 support for parallel display Denis Carikli
2014-06-16 10:15 ` Russell King - ARM Linux
2014-06-16 10:11 ` [PATCH v14 03/10] imx-drm: Correct BGR666 and the board's dts that use them Denis Carikli
2014-06-16 10:15 ` Russell King - ARM Linux
2014-06-16 10:11 ` [PATCH v14 04/10] imx-drm: use defines for clock polarity settings Denis Carikli
2014-06-24 15:13 ` Russell King - ARM Linux
2014-06-24 16:25 ` Denis Carikli
2014-06-24 16:35 ` Russell King - ARM Linux
2014-06-25 4:48 ` Sascha Hauer
2014-06-25 8:43 ` Russell King - ARM Linux
2014-06-25 9:46 ` Sascha Hauer
2014-06-25 9:44 ` Denis Carikli
2014-06-26 20:56 ` Russell King - ARM Linux
2014-06-27 14:17 ` [PATCH v14 updated] " Denis Carikli
2014-06-16 10:11 ` [PATCH v14 05/10] ARM: dts: imx5*, imx6*: correct display-timings nodes Denis Carikli
2014-06-24 15:01 ` Russell King - ARM Linux
2014-06-25 2:29 ` Shawn Guo
2014-06-16 10:11 ` [PATCH v14 06/10] drm: drm_display_mode: add signal polarity flags Denis Carikli
2014-06-24 14:57 ` Russell King - ARM Linux
2014-06-24 22:13 ` Thierry Reding
2014-06-16 10:11 ` [PATCH v14 07/10] imx-drm: Use drm_display_mode timings flags Denis Carikli
2014-06-25 9:20 ` Russell King - ARM Linux
2014-06-16 10:11 ` [PATCH v14 08/10] drm/panel: Add Eukrea mbimxsd51 displays Denis Carikli
2014-06-24 15:06 ` Russell King - ARM Linux
2014-06-24 19:52 ` Rob Herring
2014-06-24 21:56 ` Thierry Reding [this message]
2014-06-25 9:42 ` Denis Carikli
2014-06-24 21:49 ` Thierry Reding
2014-06-24 21:56 ` Eric Bénard
2014-06-24 22:04 ` Thierry Reding
2014-06-25 8:27 ` Denis Carikli
2014-06-16 10:11 ` [PATCH v14 09/10] ARM: dts: mbimx51sd: Add display support Denis Carikli
2014-06-16 12:29 ` Denis Carikli
2014-06-17 13:46 ` Denis Carikli
2014-06-16 10:11 ` [PATCH v14 10/10] ARM: dts: mbimx51sd: Add CMO-QVGA backlight support Denis Carikli
2014-06-16 10:14 ` [PATCH v14 01/10] [media] v4l2: add new V4L2_PIX_FMT_RGB666 pixel format Russell King - ARM Linux
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140624215647.GA30143@mithrandir \
--to=thierry.reding@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).