From: mark.rutland@arm.com (Mark Rutland)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] mtd: hisilicon: add device tree binding documentation
Date: Mon, 30 Jun 2014 10:52:34 +0100 [thread overview]
Message-ID: <20140630095234.GZ7262@leverpostej> (raw)
In-Reply-To: <1404115409-20200-4-git-send-email-wangzhou.bry@gmail.com>
On Mon, Jun 30, 2014 at 09:03:29AM +0100, Zhou Wang wrote:
> Signed-off-by: Zhou Wang <wangzhou.bry@gmail.com>
> ---
> .../devicetree/bindings/mtd/hisi-nand.txt | 38 ++++++++++++++++++++
> 1 file changed, 38 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mtd/hisi-nand.txt
>
> diff --git a/Documentation/devicetree/bindings/mtd/hisi-nand.txt b/Documentation/devicetree/bindings/mtd/hisi-nand.txt
> new file mode 100644
> index 0000000..1cc6470
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/hisi-nand.txt
> @@ -0,0 +1,38 @@
> +Hisilicon Hip04 Soc NAND controller DT binding
> +
> +Required properties:
> +- compatible: Should be "hisilicon,nfc504".
> +- reg: Contain registers location and length for reg and data.
I'm not sure I follow. The example below has two reg entries. What does
each entry represent, and what does the presence of multiple entries
mean?
> +- interrupts: Interrupt number for nfc.
Just the one?
> +- nand-bus-width: See nand.txt.
> +- nand-ecc-mode: See nand.txt.
> +- hisi,nand-ecc-bits: ECC bits type support.
> + <0>: none ecc
> + <1>: Can correct 1bit per 512byte.
> + <6>: Can correct 16bits per 1K byte.
Is this an enumeration, or a number of bits?
> +- #address-cells: partition address.
> +- #size-cells: partition size.
Are these only allowed to be 1 cell, or can they be more?
Thanks,
Mark.
> +
> +Flash chip may optionally contain additional sub-nodes describing partitions of
> +the address space. See partition.txt for more detail.
> +
> +Example:
> +
> + nand: nand at 4020000 {
> + compatible = "hisilicon,nfc504";
> + reg = <0x4020000 0x10000>, <0x5000000 0x1000>;
> + interrupts = <0 379 4>;
> + nand-bus-width = <8>;
> + nand-ecc-mode = "hw";
> + hisi,nand-ecc-bits = <1>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + partition at 0 {
> + label = "nand_text";
> + reg = <0x00000000 0x00400000>;
> + };
> +
> + ...
> +
> + };
> --
> 1.7.9.5
>
>
next prev parent reply other threads:[~2014-06-30 9:52 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-30 8:03 [PATCH 0/3] mtd: hisilicon: add a new driver for NAND controller of hisilicon hip04 Soc Zhou Wang
2014-06-30 8:03 ` [PATCH 1/3] mtd: hisilicon: add device tree node for nand controller Zhou Wang
2014-07-09 7:08 ` Jerome FORISSIER
2014-07-11 2:40 ` Zhou Wang
2014-06-30 8:03 ` [PATCH 2/3] mtd: hisilicon: add a new nand controller driver for hisilicon hip04 Soc Zhou Wang
2014-06-30 9:00 ` Arnd Bergmann
2014-06-30 9:59 ` Caizhiyong
2014-07-02 2:12 ` Zhou Wang
2014-07-02 2:07 ` Zhou Wang
2014-06-30 9:45 ` Ivan Khoronzhuk
2014-07-02 2:09 ` Zhou Wang
2014-06-30 10:00 ` Mark Rutland
2014-07-02 2:15 ` Zhou Wang
2014-06-30 8:03 ` [PATCH 3/3] mtd: hisilicon: add device tree binding documentation Zhou Wang
2014-06-30 9:52 ` Mark Rutland [this message]
2014-07-02 2:46 ` Zhou Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140630095234.GZ7262@leverpostej \
--to=mark.rutland@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox