From mboxrd@z Thu Jan 1 00:00:00 1970 From: mark.rutland@arm.com (Mark Rutland) Date: Mon, 30 Jun 2014 18:43:34 +0100 Subject: [PATCH v2 1/4] of: Add NVIDIA Tegra Legacy Interrupt Controller binding In-Reply-To: <1403917351-13215-1-git-send-email-thierry.reding@gmail.com> References: <1403917351-13215-1-git-send-email-thierry.reding@gmail.com> Message-ID: <20140630174334.GF28740@leverpostej> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Sat, Jun 28, 2014 at 02:02:28AM +0100, Thierry Reding wrote: > From: Thierry Reding > > The Legacy Interrupt Controller found on NVIDIA Tegra SoCs is used by > the AVP coprocessor and can also serve as a backup for the ARM Cortex > CPU's local interrupt controller (GIC). > > The LIC is subdivided into multiple identical units, each handling 32 > possible interrupt sources. > > Signed-off-by: Thierry Reding > --- > Changes in v2: > - new patch > > .../interrupt-controller/nvidia,tegra20-ictlr.txt | 19 +++++++++++++++++++ > 1 file changed, 19 insertions(+) > create mode 100644 Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt > > diff --git a/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt b/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt > new file mode 100644 > index 000000000000..c695ec713740 > --- /dev/null > +++ b/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt > @@ -0,0 +1,19 @@ > +NVIDIA Tegra Legacy Interrupt Controller > + > +The legacy interrupt controller is divided into units that serve 32 interrupts > +each. Tegra20 implements four units, whereas Tegra30 and later implement five. > + > +Required properties: > +- compatible: "nvidia,tegra-ictlr" And valid values are? > +- reg: Physical base address and length of the controller's registers. There > + should be one entry for each unit. > + > +Example: > + > + interrupt-controller at 60004000 { > + compatible = "nvidia,tegra20-ictlr"; > + reg = <0x60004000 0x40 /* primary controller */ > + 0x60004100 0x40 /* secondary controller */ > + 0x60004200 0x40 /* tertiary controller */ > + 0x60004300 0x40>; /* quaternary controller */ Could we please bracket the entries individually, e.g. reg = <0x60004000 0x40>, <0x60004100 0x40>, <0x60004200 0x40>, <0x60004300 0x40>; How do the interrupt lines correspond to those of the GIC? Cheers, Mark.