From mboxrd@z Thu Jan 1 00:00:00 1970 From: balbi@ti.com (Felipe Balbi) Date: Mon, 30 Jun 2014 13:34:06 -0500 Subject: [PATCH v2 05/12] usb: phy: add the Berlin USB PHY driver In-Reply-To: <20140630145211.GA29613@kwain> References: <1403606121-6368-1-git-send-email-antoine.tenart@free-electrons.com> <1403606121-6368-6-git-send-email-antoine.tenart@free-electrons.com> <20140627155622.GL8069@saruman.home> <20140627160557.GA6622@kwain> <20140627230433.GC762@saruman.home> <20140630145211.GA29613@kwain> Message-ID: <20140630183406.GT31442@saruman.home> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Mon, Jun 30, 2014 at 04:52:11PM +0200, Antoine T?nart wrote: > Felipe, > > On Fri, Jun 27, 2014 at 06:04:33PM -0500, Felipe Balbi wrote: > > On Fri, Jun 27, 2014 at 06:05:57PM +0200, Antoine T?nart wrote: > > > Hi Felipe, > > > > > > On Fri, Jun 27, 2014 at 10:56:22AM -0500, Felipe Balbi wrote: > > > > On Tue, Jun 24, 2014 at 12:35:14PM +0200, Antoine T?nart wrote: > > > > > Add the driver driving the Marvell Berlin USB PHY. This allows to > > > > > initialize the PHY and to use it from the USB driver later. > > > > > > > > > > Signed-off-by: Antoine T?nart > > > > > > > > since this is a brand new driver, it should go to drivers/phy instead. > > > > > > This PHY is used by a ChipIdea USB driver, which uses the provided > > > common function for ChipIdea. These functions use the usb_phy framework. > > > That's why this PHY driver is there. > > > > right, but you can add support for the new PHY layer which would help > > other users convert their PHY drivers to the new PHY framework. > > Adding the support for the new PHY layer in the common CI code is not > complicated, but these functions also use some parts from usb hcd or usb > otg which are only usb_phy compatible. > > Shouldn't these parts add the new PHY support first, to avoid ending up > with a fairly big series, quite long to do and complicated to review? sure, patches are welcome. :-) -- balbi -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: