From: mpa@pengutronix.de (Markus Pargmann)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/5] ARM: dts: imx6sx: Fix SSI nodes
Date: Tue, 1 Jul 2014 09:49:28 +0200 [thread overview]
Message-ID: <20140701074928.GE28033@pengutronix.de> (raw)
In-Reply-To: <20140701074511.GC28033@pengutronix.de>
On Tue, Jul 01, 2014 at 09:45:11AM +0200, Markus Pargmann wrote:
> Hi Fabio,
>
> On Tue, Jul 01, 2014 at 02:55:26AM -0300, Fabio Estevam wrote:
> > From: Fabio Estevam <fabio.estevam@freescale.com>
> >
> > The fsl_ssi driver only needs one clock to work, so only pass the required
> > SSI clock as done in the other mx6 dtsi files.
>
> Actually I would prefer to have the clock defined in the .dtsi files.
> The fsl-ssi driver only enables the baud clock if the SSI unit is the
> clock master. So in all other cases the clock is not enabled and keeps
> disabled.
>
> Also the clock is SSI specific, you don't have a choice which clock to
> use, there is no board dependency on this clock. So I think we should
> fix the other imx6 dtsi files instead.
>
> >
> > Also pass the fsl,fifo-depth property.
> >
> > Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> > ---
> > arch/arm/boot/dts/imx6sx.dtsi | 15 ++++++---------
> > 1 file changed, 6 insertions(+), 9 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
> > index 2929078..ef3cea2 100644
> > --- a/arch/arm/boot/dts/imx6sx.dtsi
> > +++ b/arch/arm/boot/dts/imx6sx.dtsi
> > @@ -301,11 +301,10 @@
> > compatible = "fsl,imx6sx-ssi", "fsl,imx21-ssi";
> > reg = <0x02028000 0x4000>;
> > interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
> > - clocks = <&clks IMX6SX_CLK_SSI1_IPG>,
> > - <&clks IMX6SX_CLK_SSI1>;
> > - clock-names = "ipg", "baud";
> > + clocks = <&clks IMX6SX_CLK_SSI1>;
>
> It seems you are removing the wrong clock here. 'ipg' is necessary,
> 'baud' is only used for master mode.
Oh a later patch explains the removal of the 'wrong' clock. So just
ignore this part.
Regards,
Markus
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140701/7bdb8965/attachment-0001.sig>
next prev parent reply other threads:[~2014-07-01 7:49 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-01 5:55 [PATCH 1/5] ARM: dts: imx6sx: Fix sdma node Fabio Estevam
2014-07-01 5:55 ` [PATCH 2/5] ARM: dts: imx6sx: Fix SSI nodes Fabio Estevam
2014-07-01 7:45 ` Markus Pargmann
2014-07-01 7:49 ` Markus Pargmann [this message]
2014-07-01 5:55 ` [PATCH 3/5] ARM: imx: clk-imx6sx: Remove SSI IPG clocks Fabio Estevam
2014-07-01 6:23 ` Nicolin Chen
2014-07-01 5:55 ` [PATCH 4/5] ARM: imx: clk-gate2: Use post decrement for share_count Fabio Estevam
2014-07-01 11:52 ` Shawn Guo
2014-07-01 17:44 ` Fabio Estevam
2014-07-02 4:35 ` Shawn Guo
2014-07-02 14:27 ` Fabio Estevam
2014-07-03 3:26 ` Shawn Guo
2014-07-02 15:29 ` Mike Turquette
2014-07-02 16:52 ` Fabio Estevam
2014-07-02 17:17 ` Mike Turquette
2014-07-03 7:46 ` Shawn Guo
2014-07-03 7:56 ` Shawn Guo
2014-07-01 5:55 ` [PATCH 5/5] ARM: dts: imx6sx-sdb: Add audio support Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140701074928.GE28033@pengutronix.de \
--to=mpa@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).