From: boris.brezillon@free-electrons.com (Boris BREZILLON)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 00/14] AT91: PIT: Cleanups and move to drivers/clocksource
Date: Tue, 1 Jul 2014 11:52:10 +0200 [thread overview]
Message-ID: <20140701115210.58a350e6@bbrezillon> (raw)
In-Reply-To: <1404207208-14513-1-git-send-email-maxime.ripard@free-electrons.com>
On Tue, 1 Jul 2014 11:33:13 +0200
Maxime Ripard <maxime.ripard@free-electrons.com> wrote:
> Hi everyone,
>
> This series cleans up the PIT driver in order for it to not depend on
> anything in mach-at91 anymore, and in the end move it out of
> mach-at91.
>
> Along the way, these patches also do a bit of cleanup.
>
> This has been tested on a G45-EK without DT and an Xplained with DT.
>
On the whole series:
Acked-by Boris BREZILLON <boris.brezillon@free-electrons.com>
> Thanks,
> Maxime
>
> Changes from v1:
> - Changed Kconfig option to ATMEL_PIT
> - Used DIV_ROUND_CLOSEST to compute the pit rate
>
> Maxime Ripard (14):
> AT91: PIT: Follow the general coding rules
> AT91: generic.h: Add include safe guards
> AT91: PIT: Use DIV_ROUND_CLOSEST to compute the cycles
> AT91: PIT: Use of_have_populated_dt instead of CONFIG_OF
> AT91: PIT: Rework probe functions
> AT91: dt: Remove init_time definitions
> AT91: PIT: Use consistent exit path in probe
> AT91: PIT: Use pr_fmt
> AT91: PIT: use request_irq instead of setup_irq
> AT91: PIT: (Almost) remove the global variables
> AT91: soc: Add init_time callback
> AT91: Convert the boards to the init_time callback
> AT91: PIT: Convert to an early_platform_device
> AT91: PIT: Move the driver to drivers/clocksource
>
> arch/arm/mach-at91/Kconfig | 5 -
> arch/arm/mach-at91/Makefile | 1 -
> arch/arm/mach-at91/at91sam9260.c | 34 +++-
> arch/arm/mach-at91/at91sam9261.c | 34 +++-
> arch/arm/mach-at91/at91sam9263.c | 34 +++-
> arch/arm/mach-at91/at91sam926x_time.c | 294
> ------------------------------
> arch/arm/mach-at91/at91sam9g45.c | 35 +++-
> arch/arm/mach-at91/at91sam9rl.c | 34 +++-
> arch/arm/mach-at91/board-afeb-9260v1.c | 2 +-
> arch/arm/mach-at91/board-cam60.c | 2 +-
> arch/arm/mach-at91/board-cpu9krea.c | 2 +-
> arch/arm/mach-at91/board-dt-sam9.c | 10 --
> arch/arm/mach-at91/board-dt-sama5.c | 9 -
> arch/arm/mach-at91/board-flexibity.c | 2 +-
> arch/arm/mach-at91/board-foxg20.c | 2 +-
> arch/arm/mach-at91/board-gsia18s.c | 2 +-
> arch/arm/mach-at91/board-pcontrol-g20.c | 2 +-
> arch/arm/mach-at91/board-sam9-l9260.c | 2 +-
> arch/arm/mach-at91/board-sam9260ek.c | 2 +-
> arch/arm/mach-at91/board-sam9261ek.c | 4 +-
> arch/arm/mach-at91/board-sam9263ek.c | 2 +-
> arch/arm/mach-at91/board-sam9g20ek.c | 4 +-
> arch/arm/mach-at91/board-sam9m10g45ek.c | 2 +-
> arch/arm/mach-at91/board-sam9rlek.c | 2 +-
> arch/arm/mach-at91/board-snapper9260.c | 2 +-
> arch/arm/mach-at91/board-stamp9g20.c | 4 +-
> arch/arm/mach-at91/generic.h | 8 +-
> arch/arm/mach-at91/setup.c | 5 +
> arch/arm/mach-at91/soc.h | 1 +
> drivers/clocksource/Kconfig | 4 +
> drivers/clocksource/Makefile | 1 +
> drivers/clocksource/timer-atmel-pit.c | 304
> ++++++++++++++++++++++++++++++++ 32 files changed, 506 insertions(+),
> 345 deletions(-) delete mode 100644
> arch/arm/mach-at91/at91sam926x_time.c create mode 100644
> drivers/clocksource/timer-atmel-pit.c
>
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
next prev parent reply other threads:[~2014-07-01 9:52 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-01 9:33 [PATCH v2 00/14] AT91: PIT: Cleanups and move to drivers/clocksource Maxime Ripard
2014-07-01 9:33 ` [PATCH v2 01/14] AT91: PIT: Follow the general coding rules Maxime Ripard
2014-07-01 9:33 ` [PATCH v2 02/14] AT91: generic.h: Add include safe guards Maxime Ripard
2014-07-01 9:33 ` [PATCH v2 03/14] AT91: PIT: Use DIV_ROUND_CLOSEST to compute the cycles Maxime Ripard
2014-07-01 9:33 ` [PATCH v2 04/14] AT91: PIT: Use of_have_populated_dt instead of CONFIG_OF Maxime Ripard
2014-07-01 9:33 ` [PATCH v2 05/14] AT91: PIT: Rework probe functions Maxime Ripard
2014-07-01 9:33 ` [PATCH v2 06/14] AT91: dt: Remove init_time definitions Maxime Ripard
2014-07-01 9:33 ` [PATCH v2 07/14] AT91: PIT: Use consistent exit path in probe Maxime Ripard
2014-07-01 9:33 ` [PATCH v2 08/14] AT91: PIT: Use pr_fmt Maxime Ripard
2014-07-01 9:33 ` [PATCH v2 09/14] AT91: PIT: use request_irq instead of setup_irq Maxime Ripard
2014-07-01 9:33 ` [PATCH v2 10/14] AT91: PIT: (Almost) remove the global variables Maxime Ripard
2014-07-01 9:33 ` [PATCH v2 11/14] AT91: soc: Add init_time callback Maxime Ripard
2014-07-01 9:33 ` [PATCH v2 12/14] AT91: Convert the boards to the " Maxime Ripard
2014-07-01 9:33 ` [PATCH v2 13/14] AT91: PIT: Convert to an early_platform_device Maxime Ripard
2014-07-01 9:33 ` [PATCH v2 14/14] AT91: PIT: Move the driver to drivers/clocksource Maxime Ripard
2014-07-01 9:52 ` Boris BREZILLON [this message]
2014-07-01 16:01 ` [PATCH v2 00/14] AT91: PIT: Cleanups and move " Alexandre Belloni
2014-07-10 7:51 ` Maxime Ripard
2014-07-17 9:50 ` Maxime Ripard
2014-07-17 10:31 ` Daniel Lezcano
2014-07-17 13:45 ` Maxime Ripard
2014-07-21 9:14 ` Daniel Lezcano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140701115210.58a350e6@bbrezillon \
--to=boris.brezillon@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).