[PATCH] ARM: cpu_pj4b_suspend_size should base on cpu_v7_suspend_size

[shawn.guo@freescale.com (Shawn Guo)]

On Wed, Jul 02, 2014 at 02:48:35PM +0800, Shawn Guo wrote:
> Since pj4b suspend/resume routines are implemented based on generic
> ARMv7 ones, instead of hard-coding cpu_pj4b_suspend_size, we should have
> it be cpu_v7_suspend_size plus pj4b specific bytes.  Otherwise, if
> cpu_v7_suspend_size gets updated alone, the pj4b suspend/resume will
> likely be broken.
> 
> While at it, fix the comments in cpu_pj4b_do_resume, as we're restoring
> CP15 registers rather than saving in there.
> 
> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
> ---
> Completely untested.
> 
>  arch/arm/mm/proc-v7.S | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
> index 3db2c2f04a30..604dda5f65cc 100644
> --- a/arch/arm/mm/proc-v7.S
> +++ b/arch/arm/mm/proc-v7.S
> @@ -184,16 +184,16 @@ ENDPROC(cpu_pj4b_do_suspend)
>  
>  ENTRY(cpu_pj4b_do_resume)
>  	ldmia	r0!, {r6 - r10}
> -	mcr	p15, 1, r6, c15, c1, 0  @ save CP15 - extra features
> -	mcr	p15, 1, r7, c15, c2, 0	@ save CP15 - Aux Func Modes Ctrl 0
> -	mcr	p15, 1, r8, c15, c1, 2	@ save CP15 - Aux Debug Modes Ctrl 2
> -	mcr	p15, 1, r9, c15, c1, 1  @ save CP15 - Aux Debug Modes Ctrl 1
> -	mcr	p15, 0, r10, c9, c14, 0  @ save CP15 - PMC
> +	mcr	p15, 1, r6, c15, c1, 0  @ retore CP15 - extra features
> +	mcr	p15, 1, r7, c15, c2, 0	@ retore CP15 - Aux Func Modes Ctrl 0
> +	mcr	p15, 1, r8, c15, c1, 2	@ retore CP15 - Aux Debug Modes Ctrl 2
> +	mcr	p15, 1, r9, c15, c1, 1  @ retore CP15 - Aux Debug Modes Ctrl 1
> +	mcr	p15, 0, r10, c9, c14, 0  @ retore CP15 - PMC

s/retore/restore

I fixed the typo, added Gregory's Acked-by and Tested-by tags, and put
it into patch system as 8089/1.

Shawn

>  	b cpu_v7_do_resume
>  ENDPROC(cpu_pj4b_do_resume)
>  #endif
>  .globl	cpu_pj4b_suspend_size
> -.equ	cpu_pj4b_suspend_size, 4 * 14
> +.equ	cpu_pj4b_suspend_size, cpu_v7_suspend_size + 4 * 5
>  
>  #endif
>  
> -- 
> 1.8.3.2
>