[PATCH v2] ARM: mx25: Add basic suspend/resume support

[shawn.guo@freescale.com (Shawn Guo)]

On Wed, Jul 02, 2014 at 09:27:17PM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
> 
> Tested basic suspend/resume on a mx25pdk:
> 
> root at freescale /$ echo mem > /sys/power/state 
> PM: Syncing filesystems ... done.
> Freezing user space processes ... (elapsed 0.001 seconds) done.
> Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
> Suspending console(s) (use no_console_suspend to debug)
> 
> (Press the keypad)
> 
> PM: suspend of devices complete after 5.637 msecs
> PM: late suspend of devices complete after 1.649 msecs
> PM: noirq suspend of devices complete after 1.874 msecs
> PM: noirq resume of devices complete after 1.643 msecs
> PM: early resume of devices complete after 1.923 msecs
> PM: resume of devices complete after 62.884 msecs
> Restarting tasks ... done.
> fec 50038000.ethernet eth0: Link is Down
> fec 50038000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
> root at freescale /$ 
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
> Change since v1:
> - Fix blank lines
> - Do not create a new file for storing the prototype
> 
>  arch/arm/mach-imx/Makefile   |  2 +-
>  arch/arm/mach-imx/imx25-dt.c |  1 +
>  arch/arm/mach-imx/mx25.h     |  2 ++
>  arch/arm/mach-imx/pm-imx25.c | 41 +++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 45 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/mach-imx/pm-imx25.c
> 
> diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
> index a364e20..ddc28d4 100644
> --- a/arch/arm/mach-imx/Makefile
> +++ b/arch/arm/mach-imx/Makefile
> @@ -3,7 +3,7 @@ obj-y := time.o cpu.o system.o irq-common.o
>  obj-$(CONFIG_SOC_IMX1) += clk-imx1.o mm-imx1.o
>  obj-$(CONFIG_SOC_IMX21) += clk-imx21.o mm-imx21.o
>  
> -obj-$(CONFIG_SOC_IMX25) += clk-imx25.o mm-imx25.o ehci-imx25.o cpu-imx25.o
> +obj-$(CONFIG_SOC_IMX25) += clk-imx25.o mm-imx25.o ehci-imx25.o cpu-imx25.o pm-imx25.o
>  
>  obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o
>  obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o
> diff --git a/arch/arm/mach-imx/imx25-dt.c b/arch/arm/mach-imx/imx25-dt.c
> index cf8032b..2872ef7 100644
> --- a/arch/arm/mach-imx/imx25-dt.c
> +++ b/arch/arm/mach-imx/imx25-dt.c
> @@ -33,6 +33,7 @@ DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
>  	.map_io		= mx25_map_io,
>  	.init_early	= imx25_init_early,
>  	.init_irq	= mx25_init_irq,
> +	.init_late      = imx25_pm_init,
>  	.init_machine	= imx25_dt_init,
>  	.dt_compat	= imx25_dt_board_compat,
>  	.restart	= mxc_restart,
> diff --git a/arch/arm/mach-imx/mx25.h b/arch/arm/mach-imx/mx25.h
> index ec46640..0bb5894 100644
> --- a/arch/arm/mach-imx/mx25.h
> +++ b/arch/arm/mach-imx/mx25.h
> @@ -114,4 +114,6 @@
>  extern int mx25_revision(void);
>  #endif
>  
> +void imx25_pm_init(void);
> +

Shouldn't this be put into #ifndef __ASSEMBLY__ together with
mx25_revision()?  Or can we simply put it into common.h?

>  #endif /* ifndef __MACH_MX25_H__ */
> diff --git a/arch/arm/mach-imx/pm-imx25.c b/arch/arm/mach-imx/pm-imx25.c
> new file mode 100644
> index 0000000..560baba
> --- /dev/null
> +++ b/arch/arm/mach-imx/pm-imx25.c
> @@ -0,0 +1,41 @@
> +/*
> + * Copyright 2014 Freescale Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/suspend.h>
> +#include <linux/io.h>
> +
> +#ifdef CONFIG_PM
> +static int mx25_suspend_enter(suspend_state_t state)

imx25_suspend_enter

> +{
> +	switch (state) {
> +	case PM_SUSPEND_MEM:
> +		cpu_do_idle();
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +#else
> +static inline int mx25_suspend_enter(suspend_state_t state)
> +{
> +	return 0;
> +}
> +#endif
> +
> +static const struct platform_suspend_ops mx25_suspend_ops = {

imx25_suspend_ops

Shawn

> +	.enter = mx25_suspend_enter,
> +	.valid = suspend_valid_only_mem,
> +};
> +
> +void __init imx25_pm_init(void)
> +{
> +	suspend_set_ops(&mx25_suspend_ops);
> +}
> -- 
> 1.8.3.2
>