From: arnd@arndb.de (Arnd Bergmann)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] arm: get rid of hardcoded assumptions about kernel stack size
Date: Thu, 3 Jul 2014 22:24:28 +0200 [thread overview]
Message-ID: <201407032224.28386.arnd@arndb.de> (raw)
In-Reply-To: <1403099422-850-1-git-send-email-a.ryabinin@samsung.com>
On Wednesday 18 June 2014, Andrey Ryabinin wrote:
> diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
> index f989d7c..f85d2b0 100644
> --- a/arch/arm/include/asm/thread_info.h
> +++ b/arch/arm/include/asm/thread_info.h
> @@ -14,9 +14,10 @@
>
> #include <linux/compiler.h>
> #include <asm/fpstate.h>
> +#include <asm/page.h>
>
> #define THREAD_SIZE_ORDER 1
> -#define THREAD_SIZE 8192
> +#define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER)
> #define THREAD_START_SP (THREAD_SIZE - 8)
>
> #ifndef __ASSEMBLY__
The extra #include has caused recursive inclusion on the iop13xx platform, as you
can see below. I've been able to work around it using this small patch:
diff --git a/arch/arm/mach-iop13xx/include/mach/iop13xx.h b/arch/arm/mach-iop13xx/include/mach/iop13xx.h
index 17b4027..e851f5c 100644
--- a/arch/arm/mach-iop13xx/include/mach/iop13xx.h
+++ b/arch/arm/mach-iop13xx/include/mach/iop13xx.h
@@ -3,8 +3,6 @@
#ifndef __ASSEMBLY__
-#include <linux/reboot.h>
-
/* The ATU offsets can change based on the strapping */
extern u32 iop13xx_atux_pmmr_offset;
extern u32 iop13xx_atue_pmmr_offset;
@@ -14,6 +12,7 @@ void iop13xx_map_io(void);
void iop13xx_platform_init(void);
void iop13xx_add_tpmi_devices(void);
void iop13xx_init_irq(void);
+enum reboot_mode;
void iop13xx_restart(enum reboot_mode, const char *);
/* CPUID CP6 R0 Page 0 */
diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c
index bca96f43..53c316f 100644
--- a/arch/arm/mach-iop13xx/setup.c
+++ b/arch/arm/mach-iop13xx/setup.c
@@ -20,6 +20,7 @@
#include <linux/dma-mapping.h>
#include <linux/serial_8250.h>
#include <linux/io.h>
+#include <linux/reboot.h>
#ifdef CONFIG_MTD_PHYSMAP
#include <linux/mtd/physmap.h>
#endif
but I wonder if there is a way to avoid the extra include here, as it might also
cause a general slowdown because of asm/memory.h getting pulled into more .c
files. Would it be reasonable to hardcode PAGE_SIZE here?
Arnd
----
In file included from /git/arm-soc/include/linux/srcu.h:33:0,
from /git/arm-soc/include/linux/notifier.h:15,
from /git/arm-soc/include/linux/reboot.h:5,
from /git/arm-soc/arch/arm/mach-iop13xx/include/mach/iop13xx.h:6,
from /git/arm-soc/arch/arm/mach-iop13xx/include/mach/hardware.h:14,
from /git/arm-soc/arch/arm/mach-iop13xx/include/mach/memory.h:4,
from /git/arm-soc/arch/arm/include/asm/memory.h:24,
from /git/arm-soc/arch/arm/include/asm/page.h:163,
from /git/arm-soc/arch/arm/include/asm/thread_info.h:17,
from /git/arm-soc/include/linux/thread_info.h:54,
from /git/arm-soc/include/asm-generic/preempt.h:4,
from arch/arm/include/generated/asm/preempt.h:1,
from /git/arm-soc/include/linux/preempt.h:18,
from /git/arm-soc/include/linux/spinlock.h:50,
from /git/arm-soc/include/linux/seqlock.h:35,
from /git/arm-soc/include/linux/time.h:5,
from /git/arm-soc/include/uapi/linux/timex.h:56,
from /git/arm-soc/include/linux/timex.h:56,
from /git/arm-soc/include/linux/sched.h:19,
from /git/arm-soc/arch/arm/kernel/asm-offsets.c:13:
/git/arm-soc/include/linux/rcupdate.h: In function '__rcu_read_lock':
/git/arm-soc/include/linux/rcupdate.h:219:2: error: implicit declaration of function 'preempt_disable' [-Werror=implicit-function-declaration]
preempt_disable();
^
/git/arm-soc/include/linux/rcupdate.h: In function '__rcu_read_unlock':
/git/arm-soc/include/linux/rcupdate.h:224:2: error: implicit declaration of function 'preempt_enable' [-Werror=implicit-function-declaration]
preempt_enable();
^
In file included from /git/arm-soc/include/linux/srcu.h:33:0,
from /git/arm-soc/include/linux/notifier.h:15,
from /git/arm-soc/include/linux/reboot.h:5,
from /git/arm-soc/arch/arm/mach-iop13xx/include/mach/iop13xx.h:6,
from /git/arm-soc/arch/arm/mach-iop13xx/include/mach/hardware.h:14,
from /git/arm-soc/arch/arm/mach-iop13xx/include/mach/memory.h:4,
from /git/arm-soc/arch/arm/include/asm/memory.h:24,
from /git/arm-soc/arch/arm/include/asm/page.h:163,
from /git/arm-soc/arch/arm/include/asm/thread_info.h:17,
from /git/arm-soc/include/linux/thread_info.h:54,
from /git/arm-soc/include/asm-generic/preempt.h:4,
from arch/arm/include/generated/asm/preempt.h:1,
from /git/arm-soc/include/linux/preempt.h:18,
from /git/arm-soc/include/linux/spinlock.h:50,
from /git/arm-soc/include/linux/seqlock.h:35,
from /git/arm-soc/include/linux/time.h:5,
from /git/arm-soc/include/uapi/linux/timex.h:56,
from /git/arm-soc/include/linux/timex.h:56,
from /git/arm-soc/include/linux/sched.h:19,
from /git/arm-soc/arch/arm/kernel/asm-offsets.c:13:
/git/arm-soc/include/linux/rcupdate.h: In function 'rcu_read_lock_bh':
/git/arm-soc/include/linux/rcupdate.h:928:2: error: implicit declaration of function 'local_bh_disable' [-Werror=implicit-function-declaration]
local_bh_disable();
^
/git/arm-soc/include/linux/rcupdate.h: In function 'rcu_read_unlock_bh':
/git/arm-soc/include/linux/rcupdate.h:942:2: error: implicit declaration of function 'local_bh_enable' [-Werror=implicit-function-declaration]
local_bh_enable();
^
/git/arm-soc/include/linux/rcupdate.h: In function 'rcu_read_lock_sched_notrace':
/git/arm-soc/include/linux/rcupdate.h:968:2: error: implicit declaration of function 'preempt_disable_notrace' [-Werror=implicit-function-declaration]
preempt_disable_notrace();
^
/git/arm-soc/include/linux/rcupdate.h: In function 'rcu_read_unlock_sched_notrace':
/git/arm-soc/include/linux/rcupdate.h:988:2: error: implicit declaration of function 'preempt_enable_notrace' [-Werror=implicit-function-declaration]
preempt_enable_notrace();
^
In file included from /git/arm-soc/include/linux/ktime.h:25:0,
from /git/arm-soc/include/linux/timer.h:5,
from /git/arm-soc/include/linux/workqueue.h:8,
from /git/arm-soc/include/linux/srcu.h:34,
from /git/arm-soc/include/linux/notifier.h:15,
from /git/arm-soc/include/linux/reboot.h:5,
from /git/arm-soc/arch/arm/mach-iop13xx/include/mach/iop13xx.h:6,
from /git/arm-soc/arch/arm/mach-iop13xx/include/mach/hardware.h:14,
from /git/arm-soc/arch/arm/mach-iop13xx/include/mach/memory.h:4,
from /git/arm-soc/arch/arm/include/asm/memory.h:24,
from /git/arm-soc/arch/arm/include/asm/page.h:163,
from /git/arm-soc/arch/arm/include/asm/thread_info.h:17,
from /git/arm-soc/include/linux/thread_info.h:54,
from /git/arm-soc/include/asm-generic/preempt.h:4,
from arch/arm/include/generated/asm/preempt.h:1,
from /git/arm-soc/include/linux/preempt.h:18,
from /git/arm-soc/include/linux/spinlock.h:50,
from /git/arm-soc/include/linux/seqlock.h:35,
from /git/arm-soc/include/linux/time.h:5,
from /git/arm-soc/include/uapi/linux/timex.h:56,
from /git/arm-soc/include/linux/timex.h:56,
from /git/arm-soc/include/linux/sched.h:19,
from /git/arm-soc/arch/arm/kernel/asm-offsets.c:13:
/git/arm-soc/include/linux/jiffies.h: At top level:
/git/arm-soc/include/linux/jiffies.h:256:10: warning: "NSEC_PER_SEC" is not defined [-Wundef]
... many more...
next prev parent reply other threads:[~2014-07-03 20:24 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-18 13:50 [PATCH] arm: get rid of hardcoded assumptions about kernel stack size Andrey Ryabinin
2014-06-18 14:31 ` Will Deacon
2014-06-18 14:49 ` Andrey Ryabinin
2014-06-18 14:40 ` Nicolas Pitre
2014-06-18 15:27 ` Andrey Ryabinin
2014-07-03 20:24 ` Arnd Bergmann [this message]
2014-07-04 7:13 ` Andrey Ryabinin
2014-07-04 10:27 ` Arnd Bergmann
2014-07-04 13:38 ` Andrey Ryabinin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201407032224.28386.arnd@arndb.de \
--to=arnd@arndb.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).