From mboxrd@z Thu Jan 1 00:00:00 1970 From: lee.jones@linaro.org (Lee Jones) Date: Wed, 9 Jul 2014 17:37:20 +0100 Subject: [PATCH v3 1/5] phy: miphy365x: Add Device Tree bindings for the MiPHY365x In-Reply-To: References: <1404906074-31992-1-git-send-email-lee.jones@linaro.org> <1404906074-31992-2-git-send-email-lee.jones@linaro.org> Message-ID: <20140709163720.GN2635@lee--X1> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, 09 Jul 2014, Gabriel Fernandez wrote: > On 9 July 2014 13:41, Lee Jones wrote: > > The MiPHY365x is a Generic PHY which can serve various SATA or PCIe > > devices. It has 2 ports which it can use for either; both SATA, both > > PCIe or one of each in any configuration. > > > > Cc: Kishon Vijay Abraham I > > Acked-by: Mark Rutland > > Acked-by: Alexandre Torgue > > Signed-off-by: Lee Jones > > --- > > .../devicetree/bindings/phy/phy-miphy365x.txt | 76 ++++++++++++++++++++++ > > 1 file changed, 76 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/phy/phy-miphy365x.txt [...] > > +Specifying phy control of devices > > +================================= > > + > > +Device nodes should specify the configuration required in their "phys" > > +property, containing a phandle to the phy port node and a device type. > > + > > +Example: > > + > > +#include > > + > > + sata0: sata at fe380000 { > > + ... > > + phys = <&miphy365x_phy MIPHY_TYPE_SATA>; > > + ... > > In this example you select the type (SATA) but I don't understand how > do you select > the port (phy_port0 or phy_port1) Right, historical typo. Will send a v+1 as a reply, so it's easy for Kishon to collect when he applies next week. -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org ? Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog