From: computersforpeace@gmail.com (Brian Norris)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 2/9] mtd: nand: add ONFI timing mode to nand_timings converter
Date: Wed, 9 Jul 2014 10:25:55 -0700 [thread overview]
Message-ID: <20140709172555.GI7537@ld-irv-0074> (raw)
In-Reply-To: <1394647664-8258-3-git-send-email-b.brezillon.dev@gmail.com>
Hi Boris,
Since I think you were planning on revisiting this soon, I have one more
comment:
On Wed, Mar 12, 2014 at 07:07:37PM +0100, Boris BREZILLON wrote:
> diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
> index c970ce7..0b8a822 100644
> --- a/drivers/mtd/nand/Makefile
> +++ b/drivers/mtd/nand/Makefile
> @@ -2,7 +2,7 @@
> # linux/drivers/nand/Makefile
> #
>
> -obj-$(CONFIG_MTD_NAND) += nand.o
> +obj-$(CONFIG_MTD_NAND) += nand.o nand_timings.o
This is not the right place, as it will generate a new module
'nand_timings' (nand_timings.ko, if CONFIG_MTD_NAND=m). You probably
want to just add nand_timings.o to the 'nand-objs' list at the bottom of
the Makefile, like this:
nand-objs := nand_base.o nand_bbt.o nand_timings.o
> obj-$(CONFIG_MTD_NAND_ECC) += nand_ecc.o
> obj-$(CONFIG_MTD_NAND_BCH) += nand_bch.o
> obj-$(CONFIG_MTD_NAND_IDS) += nand_ids.o nand_hynix.o
Thanks,
Brian
next prev parent reply other threads:[~2014-07-09 17:25 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-12 18:07 [PATCH v3 0/9] mtd: nand: add sunxi NAND Flash Controller support Boris BREZILLON
2014-03-12 18:07 ` [PATCH v3 1/9] mtd: nand: define struct nand_timings Boris BREZILLON
2014-04-30 17:51 ` Brian Norris
2014-05-01 17:36 ` Boris BREZILLON
2014-05-08 14:29 ` Lee Jones
2014-05-09 15:47 ` Boris BREZILLON
2014-05-20 18:13 ` Brian Norris
2014-03-12 18:07 ` [PATCH v3 2/9] mtd: nand: add ONFI timing mode to nand_timings converter Boris BREZILLON
2014-04-30 18:06 ` Brian Norris
2014-07-09 17:25 ` Brian Norris [this message]
2014-03-12 18:07 ` [PATCH v3 3/9] of: mtd: add NAND timing mode retrieval support Boris BREZILLON
2014-04-30 18:14 ` Brian Norris
2014-03-12 18:07 ` [PATCH v3 4/9] of: mtd: add documentation for the ONFI NAND timing mode property Boris BREZILLON
2014-03-12 18:27 ` Warner Losh
2014-03-12 18:48 ` Boris BREZILLON
2014-05-20 18:25 ` Brian Norris
2014-05-20 19:30 ` Boris BREZILLON
2014-05-20 19:51 ` Jason Gunthorpe
2014-05-20 19:55 ` Brian Norris
2014-05-20 19:52 ` Brian Norris
2014-05-20 21:32 ` Boris BREZILLON
2014-07-09 17:46 ` Brian Norris
2014-03-12 18:07 ` [PATCH v3 5/9] mtd: nand: add sunxi NAND flash controller support Boris BREZILLON
2014-05-09 16:03 ` Ezequiel Garcia
2014-05-09 16:47 ` Boris BREZILLON
2014-05-09 17:05 ` Ezequiel Garcia
2014-05-20 18:49 ` Brian Norris
2014-05-20 19:21 ` Brian Norris
2014-05-20 19:36 ` Boris BREZILLON
2014-03-12 18:07 ` [PATCH v3 6/9] mtd: nand: add sunxi NFC dt bindings doc Boris BREZILLON
2014-03-12 18:07 ` [PATCH v3 7/9] ARM: dt/sunxi: add NFC node to Allwinner A20 SoC Boris BREZILLON
2014-03-12 18:07 ` [PATCH v3 8/9] ARM: dt/sunxi: add A20 NAND controller pin definitions Boris BREZILLON
2014-03-12 18:07 ` [PATCH v3 9/9] ARM: sunxi/dt: enable NAND on cubietruck board Boris BREZILLON
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140709172555.GI7537@ld-irv-0074 \
--to=computersforpeace@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox