From: peterz@infradead.org (Peter Zijlstra)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 08/12] sched: move cfs task on a CPU with higher capacity
Date: Thu, 10 Jul 2014 13:31:20 +0200 [thread overview]
Message-ID: <20140710113120.GA3935@laptop> (raw)
In-Reply-To: <1404144343-18720-9-git-send-email-vincent.guittot@linaro.org>
On Mon, Jun 30, 2014 at 06:05:39PM +0200, Vincent Guittot wrote:
You 'forgot' to update the comment that goes with nohz_kick_needed().
> @@ -7233,9 +7253,10 @@ static inline int nohz_kick_needed(struct rq *rq)
> struct sched_domain *sd;
> struct sched_group_capacity *sgc;
> int nr_busy, cpu = rq->cpu;
> + bool kick = false;
>
> if (unlikely(rq->idle_balance))
> + return false;
>
> /*
> * We may be recently in ticked or tickless idle mode. At the first
> @@ -7249,38 +7270,41 @@ static inline int nohz_kick_needed(struct rq *rq)
> * balancing.
> */
> if (likely(!atomic_read(&nohz.nr_cpus)))
> + return false;
>
> if (time_before(now, nohz.next_balance))
> + return false;
>
> if (rq->nr_running >= 2)
> + return true;
>
> rcu_read_lock();
> sd = rcu_dereference(per_cpu(sd_busy, cpu));
> if (sd) {
> sgc = sd->groups->sgc;
> nr_busy = atomic_read(&sgc->nr_busy_cpus);
>
> + if (nr_busy > 1) {
> + kick = true;
> + goto unlock;
> + }
> +
> + if ((rq->cfs.h_nr_running >= 1)
> + && ((rq->cpu_capacity * sd->imbalance_pct) <
> + (rq->cpu_capacity_orig * 100))) {
> + kick = true;
> + goto unlock;
> + }
Again, why only for shared caches?
> }
>
> sd = rcu_dereference(per_cpu(sd_asym, cpu));
> if (sd && (cpumask_first_and(nohz.idle_cpus_mask,
> sched_domain_span(sd)) < cpu))
> + kick = true;
>
> +unlock:
> rcu_read_unlock();
> + return kick;
> }
next prev parent reply other threads:[~2014-07-10 11:31 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-30 16:05 [PATCH v3 00/12] sched: consolidation of cpu_power Vincent Guittot
2014-06-30 16:05 ` [PATCH v3 01/12] sched: fix imbalance flag reset Vincent Guittot
2014-07-08 3:13 ` Preeti U Murthy
2014-07-08 10:12 ` Vincent Guittot
2014-07-09 3:54 ` Preeti U Murthy
2014-07-09 8:27 ` Vincent Guittot
2014-07-09 10:43 ` Peter Zijlstra
2014-07-09 11:41 ` Preeti U Murthy
2014-07-09 14:44 ` Peter Zijlstra
2014-07-10 9:14 ` Vincent Guittot
2014-07-10 9:30 ` [PATCH v4 ] " Vincent Guittot
2014-07-10 10:57 ` Preeti U Murthy
2014-07-10 11:04 ` [PATCH v3 01/12] " Preeti U Murthy
2014-07-09 3:05 ` Rik van Riel
2014-07-09 3:36 ` Rik van Riel
2014-07-09 10:14 ` Peter Zijlstra
2014-07-09 10:30 ` Vincent Guittot
2014-06-30 16:05 ` [PATCH v3 02/12] sched: remove a wake_affine condition Vincent Guittot
2014-07-09 3:06 ` Rik van Riel
2014-06-30 16:05 ` [PATCH v3 03/12] sched: fix avg_load computation Vincent Guittot
2014-07-09 3:10 ` Rik van Riel
2014-06-30 16:05 ` [PATCH v3 04/12] sched: Allow all archs to set the power_orig Vincent Guittot
2014-07-09 3:11 ` Rik van Riel
2014-07-09 10:57 ` Peter Zijlstra
2014-07-10 13:42 ` Vincent Guittot
2014-06-30 16:05 ` [PATCH v3 05/12] ARM: topology: use new cpu_power interface Vincent Guittot
2014-07-09 3:11 ` Rik van Riel
2014-07-09 7:49 ` Amit Kucheria
2014-07-09 10:09 ` Vincent Guittot
2014-06-30 16:05 ` [PATCH v3 06/12] sched: add per rq cpu_power_orig Vincent Guittot
2014-07-09 3:11 ` Rik van Riel
2014-07-09 7:50 ` Amit Kucheria
2014-06-30 16:05 ` [PATCH v3 07/12] sched: test the cpu's capacity in wake affine Vincent Guittot
2014-07-09 3:12 ` Rik van Riel
2014-07-10 11:06 ` Peter Zijlstra
2014-07-10 13:58 ` Vincent Guittot
2014-06-30 16:05 ` [PATCH v3 08/12] sched: move cfs task on a CPU with higher capacity Vincent Guittot
2014-07-10 11:18 ` Peter Zijlstra
2014-07-10 14:03 ` Vincent Guittot
2014-07-11 14:51 ` Peter Zijlstra
2014-07-11 15:17 ` Vincent Guittot
2014-07-14 13:51 ` Peter Zijlstra
2014-07-15 9:21 ` Vincent Guittot
2014-07-10 11:24 ` Peter Zijlstra
2014-07-10 13:59 ` Vincent Guittot
2014-07-10 11:31 ` Peter Zijlstra [this message]
2014-06-30 16:05 ` [PATCH v3 09/12] Revert "sched: Put rq's sched_avg under CONFIG_FAIR_GROUP_SCHED" Vincent Guittot
2014-07-10 13:16 ` Peter Zijlstra
2014-07-11 7:51 ` Vincent Guittot
2014-07-11 15:13 ` Peter Zijlstra
2014-07-11 17:39 ` Vincent Guittot
2014-07-11 20:12 ` Peter Zijlstra
2014-07-14 12:55 ` Morten Rasmussen
2014-07-14 13:20 ` Peter Zijlstra
2014-07-14 14:04 ` Morten Rasmussen
2014-07-14 16:22 ` Peter Zijlstra
2014-07-15 9:20 ` Vincent Guittot
2014-07-14 17:54 ` Dietmar Eggemann
2014-07-18 1:27 ` Yuyang Du
2014-07-11 16:13 ` Morten Rasmussen
2014-07-15 9:27 ` Vincent Guittot
2014-07-15 9:32 ` Morten Rasmussen
2014-07-15 9:53 ` Vincent Guittot
2014-06-30 16:05 ` [PATCH v3 10/12] sched: get CPU's utilization statistic Vincent Guittot
2014-06-30 16:05 ` [PATCH v3 11/12] sched: replace capacity_factor by utilization Vincent Guittot
2014-06-30 16:05 ` [PATCH v3 12/12] sched: add SD_PREFER_SIBLING for SMT level Vincent Guittot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140710113120.GA3935@laptop \
--to=peterz@infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).