From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 15/23] regulator: max77686: Setup DVS-related GPIOs on probe
Date: Thu, 10 Jul 2014 14:25:34 +0100 [thread overview]
Message-ID: <20140710132534.GD11948@lee--X1> (raw)
In-Reply-To: <CADGdYn4EURaHinWVksQSPzVr=CkZYcrqvWsO7mKDz_gY9XB__Q@mail.gmail.com>
On Thu, 10 Jul 2014, amit daniel kachhap wrote:
> On Fri, Jul 4, 2014 at 3:25 PM, Javier Martinez Canillas
> <javier.martinez@collabora.co.uk> wrote:
> > MAX77686 PMIC support Dyamic Voltage Scaling (DVS) on a set
> > of Buck regulators. A number of GPIO are connected to these
> > lines and are requested by the mfd driver. Setup the GPIO
> > pins from the regulator driver.
> If possible merge this patch with patch 8. Both are adding DVS
> support. Put regmap_copy dependency patch in very beginning.
You want to merge two patches which deal with different subsystems?
That's the opposite of what we usually try and achieve.
> > Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
> > ---
> > drivers/regulator/max77686.c | 34 ++++++++++++++++++++++++++++++++++
> > 1 file changed, 34 insertions(+)
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2014-07-10 13:25 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-04 9:54 [PATCH v6 00/23] Add Maxim 77802 PMIC support Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 01/23] mfd: max77686: Convert to use regmap_irq Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 02/23] mfd: max77686: Add power management support Javier Martinez Canillas
2014-07-04 10:51 ` Krzysztof Kozlowski
2014-07-04 9:55 ` [PATCH v6 03/23] mfd: max77686: Don't define dummy function if OF isn't enabled Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 04/23] mfd: max77686: Make platform data over-rule DT Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 05/23] mfd: max77686: Return correct error when pdata isn't found Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 06/23] mfd: max77686: Make error checking consistent Javier Martinez Canillas
2014-07-04 10:54 ` Krzysztof Kozlowski
2014-07-04 9:55 ` [PATCH v6 07/23] mfd: max77686: Remove unneeded OOM error message Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 08/23] mfd: max77686: Add Dynamic Voltage Scaling (DVS) support Javier Martinez Canillas
2014-07-04 11:15 ` Krzysztof Kozlowski
2014-07-04 11:32 ` Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 09/23] rtc: max77686: Allow the max77686 rtc to wakeup the system Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 10/23] clk: max77686: Add DT include for MAX77686 PMIC clock Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 11/23] clk: Add generic driver for Maxim PMIC clocks Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 12/23] clk: max77686: Convert to the generic max clock driver Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 13/23] clk: max77686: Improve Maxim 77686 PMIC clocks binding Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 14/23] regmap: Add regmap_reg_copy function Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 15/23] regulator: max77686: Setup DVS-related GPIOs on probe Javier Martinez Canillas
2014-07-10 10:08 ` amit daniel kachhap
2014-07-10 13:25 ` Lee Jones [this message]
2014-07-11 2:03 ` Javier Martinez Canillas
2014-07-11 9:31 ` amit daniel kachhap
2014-07-04 9:55 ` [PATCH v6 16/23] mfd: max77686: Add documentation for DVS bindings Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 17/23] mfd: max77686: Add Maxim 77802 PMIC support Javier Martinez Canillas
2014-07-04 11:30 ` Krzysztof Kozlowski
2014-07-04 11:35 ` Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 18/23] mfd: max77802: Add DT binding documentation Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 19/23] regulator: Add driver for Maxim 77802 PMIC regulators Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 20/23] clk: Add driver for Maxim 77802 PMIC clocks Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 21/23] clk: max77802: Add DT binding documentation Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 22/23] rtc: Add driver for Maxim 77802 PMIC Real-Time-Clock Javier Martinez Canillas
2014-07-04 11:56 ` Krzysztof Kozlowski
2014-07-04 12:52 ` Javier Martinez Canillas
2014-07-04 13:11 ` Krzysztof Kozlowski
2014-07-04 13:23 ` Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 23/23] ARM: dts: Add max77802 to exynos5420-peach-pit and exynos5800-peach-pi Javier Martinez Canillas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140710132534.GD11948@lee--X1 \
--to=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox