[PATCH 6/9] usb: musb: core: properly setup the HW before registering it to the USB core

[balbi@ti.com (Felipe Balbi)]

On Fri, Jul 18, 2014 at 11:31:27AM +0200, Lothar Wa?mann wrote:
> Without this patch overriding the USBOTG_ID pin by setting the iddig
> bit in the USB_MODE register doesn't work because it happens too late
> to be recognized correctly.

and how did you test this ? Why is it too late ? What was your setup
when testing this ?

> Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de>
> ---
>  drivers/usb/musb/musb_core.c |   12 +++++++-----
>  1 file changed, 7 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
> index f867b44..bbf2aefb 100644
> --- a/drivers/usb/musb/musb_core.c
> +++ b/drivers/usb/musb/musb_core.c
> @@ -1988,18 +1988,21 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
>  
>  	switch (musb->port_mode) {
>  	case MUSB_PORT_MODE_HOST:
> -		status = musb_host_setup(musb, plat->power);
> +		status = musb_platform_set_mode(musb, MUSB_HOST);
>  		if (status < 0)
>  			goto fail3;
> -		status = musb_platform_set_mode(musb, MUSB_HOST);
> +		status = musb_host_setup(musb, plat->power);
>  		break;
>  	case MUSB_PORT_MODE_GADGET:
> -		status = musb_gadget_setup(musb);
> +		status = musb_platform_set_mode(musb, MUSB_PERIPHERAL);
>  		if (status < 0)
>  			goto fail3;
> -		status = musb_platform_set_mode(musb, MUSB_PERIPHERAL);
> +		status = musb_gadget_setup(musb);
>  		break;
>  	case MUSB_PORT_MODE_DUAL_ROLE:
> +		status = musb_platform_set_mode(musb, MUSB_OTG);
> +		if (status < 0)
> +			goto fail3;
>  		status = musb_host_setup(musb, plat->power);
>  		if (status < 0)
>  			goto fail3;
> @@ -2008,7 +2011,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
>  			musb_host_cleanup(musb);
>  			goto fail3;
>  		}
> -		status = musb_platform_set_mode(musb, MUSB_OTG);
>  		break;
>  	default:
>  		dev_err(dev, "unsupported port mode %d\n", musb->port_mode);
> -- 
> 1.7.10.4
> 

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140718/b38436e9/attachment.sig>