From: balbi@ti.com (Felipe Balbi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 9/9] usb: musb: musb_am335x: reinstate module loading/unloading support
Date: Fri, 18 Jul 2014 09:04:03 -0500 [thread overview]
Message-ID: <20140718140403.GI24914@saruman.home> (raw)
In-Reply-To: <1405675890-8802-10-git-send-email-LW@KARO-electronics.de>
On Fri, Jul 18, 2014 at 11:31:30AM +0200, Lothar Wa?mann wrote:
> There is no need to throw the baby out with the bath due to a bad
> failure analysis. The commit:
> 7adb5c876e9c usb: musb: Fix panic upon musb_am335x module removal
> came to a wrong conclusion about the cause of the crash it was
> "fixing". The real culprit was the phy-am335x module that was removed
> from underneath its users that were still referencing data from it.
> After having fixed this in a previous patch, module unloading can be
> reinstated.
>
> Another bug with module loading/unloading was the fact, that after
> removing the devices instantiated from DT their 'OF_POPULATED' flag
> was still set, so that re-loading the module after an unload had no
> effect. This is also fixed in this patch.
now this is a good commit log. I still can't see the need for the other
patch adding try_module_get(), though. Another thing, this needs to be
reviewed by DT folks too.
> Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de>
> ---
> drivers/usb/musb/musb_am335x.c | 23 ++++++++++++++++++-----
> 1 file changed, 18 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/usb/musb/musb_am335x.c b/drivers/usb/musb/musb_am335x.c
> index 164c868..152a6f5 100644
> --- a/drivers/usb/musb/musb_am335x.c
> +++ b/drivers/usb/musb/musb_am335x.c
> @@ -19,6 +19,22 @@ err:
> return ret;
> }
>
> +static int of_remove_populated_child(struct device *dev, void *d)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> +
> + of_device_unregister(pdev);
> + of_node_clear_flag(pdev->dev.of_node, OF_POPULATED);
I don't think this should be called by drivers; rather by the bus.
> + return 0;
> +}
> +
> +static int am335x_child_remove(struct platform_device *pdev)
> +{
> + device_for_each_child(&pdev->dev, NULL, of_remove_populated_child);
> + pm_runtime_disable(&pdev->dev);
> + return 0;
> +}
> +
> static const struct of_device_id am335x_child_of_match[] = {
> { .compatible = "ti,am33xx-usb" },
> { }
> @@ -27,17 +43,14 @@ MODULE_DEVICE_TABLE(of, am335x_child_of_match);
>
> static struct platform_driver am335x_child_driver = {
> .probe = am335x_child_probe,
> + .remove = am335x_child_remove,
> .driver = {
> .name = "am335x-usb-childs",
> .of_match_table = am335x_child_of_match,
> },
> };
>
> -static int __init am335x_child_init(void)
> -{
> - return platform_driver_register(&am335x_child_driver);
> -}
> -module_init(am335x_child_init);
> +module_platform_driver(am335x_child_driver);
>
> MODULE_DESCRIPTION("AM33xx child devices");
> MODULE_LICENSE("GPL v2");
> --
> 1.7.10.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140718/824003e4/attachment.sig>
next prev parent reply other threads:[~2014-07-18 14:04 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-18 9:31 [PATCH 0/9] usb: musb: several bugfixes for the musb driver Lothar Waßmann
2014-07-18 9:31 ` [PATCH 1/9] usb: musb: core: cleanup - remove some useless 'break's from switch statements Lothar Waßmann
2014-07-18 9:31 ` [PATCH 2/9] usb: phy: am335x: group the #includes by subdirs Lothar Waßmann
2014-07-18 9:31 ` [PATCH 3/9] usb: musb_am335x: source cleanup Lothar Waßmann
2014-07-18 9:31 ` [PATCH 4/9] usb: phy: am335x-control: prevent module from being unloaded when in use Lothar Waßmann
2014-07-18 9:31 ` [PATCH 5/9] usb: musb: print error message with dev_err() instead of dev_dbg() Lothar Waßmann
2014-07-18 9:31 ` [PATCH 6/9] usb: musb: core: properly setup the HW before registering it to the USB core Lothar Waßmann
2014-07-18 9:31 ` [PATCH 7/9] usb: phy: am335x: setup the gen_phy function pointers _before_ adding the phy Lothar Waßmann
2014-07-18 9:31 ` [PATCH 8/9] usb: phy: am335x: call usb_gen_phy_init()/usb_gen_phy_shutdown() in am335x_init()/am335x_shutdown() Lothar Waßmann
2014-07-18 9:31 ` [PATCH 9/9] usb: musb: musb_am335x: reinstate module loading/unloading support Lothar Waßmann
2014-07-18 14:04 ` Felipe Balbi [this message]
2014-07-22 7:49 ` Lothar Waßmann
2014-07-22 14:47 ` Felipe Balbi
2014-07-18 13:57 ` [PATCH 8/9] usb: phy: am335x: call usb_gen_phy_init()/usb_gen_phy_shutdown() in am335x_init()/am335x_shutdown() Felipe Balbi
2014-07-21 8:03 ` Lothar Waßmann
2014-07-21 15:10 ` Felipe Balbi
2014-07-22 8:06 ` Lothar Waßmann
2014-07-22 14:47 ` Felipe Balbi
2014-07-18 13:54 ` [PATCH 7/9] usb: phy: am335x: setup the gen_phy function pointers _before_ adding the phy Felipe Balbi
2014-07-18 13:52 ` [PATCH 6/9] usb: musb: core: properly setup the HW before registering it to the USB core Felipe Balbi
2014-07-18 13:50 ` [PATCH 5/9] usb: musb: print error message with dev_err() instead of dev_dbg() Felipe Balbi
2014-07-18 13:50 ` [PATCH 4/9] usb: phy: am335x-control: prevent module from being unloaded when in use Felipe Balbi
2014-07-18 13:45 ` [PATCH 3/9] usb: musb_am335x: source cleanup Felipe Balbi
2014-07-18 13:45 ` [PATCH 2/9] usb: phy: am335x: group the #includes by subdirs Felipe Balbi
2014-07-18 13:44 ` [PATCH 1/9] usb: musb: core: cleanup - remove some useless 'break's from switch statements Felipe Balbi
2014-07-18 16:16 ` [PATCH 0/9] usb: musb: several bugfixes for the musb driver Ezequiel Garcia
2014-07-18 16:50 ` Felipe Balbi
2014-07-21 7:34 ` Lothar Waßmann
2014-07-21 15:11 ` Felipe Balbi
2014-07-21 15:53 ` Ezequiel Garcia
2014-07-21 15:58 ` Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140718140403.GI24914@saruman.home \
--to=balbi@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).