From: ezequiel@vanguardiasur.com.ar (Ezequiel Garcia)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/9] usb: musb: several bugfixes for the musb driver
Date: Fri, 18 Jul 2014 13:16:36 -0300 [thread overview]
Message-ID: <20140718161636.GA18460@arch.cereza> (raw)
In-Reply-To: <1405675890-8802-1-git-send-email-LW@KARO-electronics.de>
Hi Lothar,
On 18 Jul 11:31 AM, Lothar Wa?mann wrote:
> The first three patches do some source code cleanup in the files that
> are modified in the subsequent patches.
>
I've applied patches 4 and 9 on a recent -next, after fixing a conflict
due to patch 3 ("usb: musb_am335x: source cleanup"):
> Patch 4 carries the proper fix reported in commit:
> 7adb5c876e9c ("usb: musb: Fix panic upon musb_am335x module removal")
>
> Patch 9 reinstates module unloading support for the musb_am335x driver
> which was disabled due to a false failure analysis
>
For these two patches, Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Tested on a beaglebone with a mass storage USB device, module load/unload
works without issues. The module_get/put in the phy is now preventing the
musb_am335x driver unload, which seems to be the real cause of the issue
I reported. Thanks for providing a proper fix!
--
Ezequiel Garcia, VanguardiaSur
www.vanguardiasur.com.ar
next prev parent reply other threads:[~2014-07-18 16:16 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-18 9:31 [PATCH 0/9] usb: musb: several bugfixes for the musb driver Lothar Waßmann
2014-07-18 9:31 ` [PATCH 1/9] usb: musb: core: cleanup - remove some useless 'break's from switch statements Lothar Waßmann
2014-07-18 9:31 ` [PATCH 2/9] usb: phy: am335x: group the #includes by subdirs Lothar Waßmann
2014-07-18 9:31 ` [PATCH 3/9] usb: musb_am335x: source cleanup Lothar Waßmann
2014-07-18 9:31 ` [PATCH 4/9] usb: phy: am335x-control: prevent module from being unloaded when in use Lothar Waßmann
2014-07-18 9:31 ` [PATCH 5/9] usb: musb: print error message with dev_err() instead of dev_dbg() Lothar Waßmann
2014-07-18 9:31 ` [PATCH 6/9] usb: musb: core: properly setup the HW before registering it to the USB core Lothar Waßmann
2014-07-18 9:31 ` [PATCH 7/9] usb: phy: am335x: setup the gen_phy function pointers _before_ adding the phy Lothar Waßmann
2014-07-18 9:31 ` [PATCH 8/9] usb: phy: am335x: call usb_gen_phy_init()/usb_gen_phy_shutdown() in am335x_init()/am335x_shutdown() Lothar Waßmann
2014-07-18 9:31 ` [PATCH 9/9] usb: musb: musb_am335x: reinstate module loading/unloading support Lothar Waßmann
2014-07-18 14:04 ` Felipe Balbi
2014-07-22 7:49 ` Lothar Waßmann
2014-07-22 14:47 ` Felipe Balbi
2014-07-18 13:57 ` [PATCH 8/9] usb: phy: am335x: call usb_gen_phy_init()/usb_gen_phy_shutdown() in am335x_init()/am335x_shutdown() Felipe Balbi
2014-07-21 8:03 ` Lothar Waßmann
2014-07-21 15:10 ` Felipe Balbi
2014-07-22 8:06 ` Lothar Waßmann
2014-07-22 14:47 ` Felipe Balbi
2014-07-18 13:54 ` [PATCH 7/9] usb: phy: am335x: setup the gen_phy function pointers _before_ adding the phy Felipe Balbi
2014-07-18 13:52 ` [PATCH 6/9] usb: musb: core: properly setup the HW before registering it to the USB core Felipe Balbi
2014-07-18 13:50 ` [PATCH 5/9] usb: musb: print error message with dev_err() instead of dev_dbg() Felipe Balbi
2014-07-18 13:50 ` [PATCH 4/9] usb: phy: am335x-control: prevent module from being unloaded when in use Felipe Balbi
2014-07-18 13:45 ` [PATCH 3/9] usb: musb_am335x: source cleanup Felipe Balbi
2014-07-18 13:45 ` [PATCH 2/9] usb: phy: am335x: group the #includes by subdirs Felipe Balbi
2014-07-18 13:44 ` [PATCH 1/9] usb: musb: core: cleanup - remove some useless 'break's from switch statements Felipe Balbi
2014-07-18 16:16 ` Ezequiel Garcia [this message]
2014-07-18 16:50 ` [PATCH 0/9] usb: musb: several bugfixes for the musb driver Felipe Balbi
2014-07-21 7:34 ` Lothar Waßmann
2014-07-21 15:11 ` Felipe Balbi
2014-07-21 15:53 ` Ezequiel Garcia
2014-07-21 15:58 ` Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140718161636.GA18460@arch.cereza \
--to=ezequiel@vanguardiasur.com.ar \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox