From: maxime.ripard@free-electrons.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] Allwinner DT additions for 3.17
Date: Fri, 18 Jul 2014 22:50:31 +0200 [thread overview]
Message-ID: <20140718205031.GA27834@lukather> (raw)
Hi Arnd, Kevin, Olof,
Here are the sunxi DT changes for 3.17.
Thanks!
Maxime
The following changes since commit 7171511eaec5bf23fb06078f59784a3a0626b38f:
Linux 3.16-rc1 (2014-06-15 17:45:28 -1000)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux.git tags/sunxi-dt-for-3.17
for you to fetch changes up to c220aec2bb793bf5a1fb451fd3e4db87654c5ba5:
ARM: dts: sun6i: Add Merrii A31 Hummingbird support (2014-07-18 22:40:37 +0200)
----------------------------------------------------------------
Allwinner DT additions for 3.17
Among the few patches that we have so far, there's a few noticeable changes:
- Introduction of the Allwinner A23 SoC
- Support for the GMAC on the A31. This is only available so far on the
boards which bootloader enable the PHY regulator.
- Addition of the infrared receiver
----------------------------------------------------------------
Alexander Bersenev (3):
ARM: sunxi: Add pins for IR controller on A20 to dtsi
ARM: sunxi: Enable IR controller on cubieboard 2 and cubietruck in dts
ARM: sunxi: Add IR controllers on A20 to dtsi
Carlo Caione (2):
ARM: dts: sun4i: Add AXP209 support to various boards
ARM: dts: sun7i: Add AXP209 support to various boards
Chen-Yu Tsai (10):
ARM: sunxi: Add Allwinner A23 dtsi
ARM: sun8i: dt: Add Ippo-q8h v5 support
ARM: dts: sunxi: Add #interrupt-cells to pinctrl nodes
ARM: sun8i: Add basic clock nodes to the DTSI
ARM: sun8i: Add reset controller nodes to the DTSI
ARM: sun8i: Add PRCM clock and reset controller nodes to the DTSI
ARM: dts: sun6i: Add pin muxing options for GMAC
ARM: dts: sun6i: Add GMAC clock node to the A31 dtsi
ARM: dts: sun6i: Add A31 GMAC gigabit ethernet controller node
ARM: dts: sun6i: Add ethernet alias for GMAC
Hans de Goede (5):
ARM: dts: sun7i: Rename sun7i-a20-ir to sun4i-a10-ir
ARM: dts: sun7i: Add ir receiver support to a20-i12-tvbox
ARM: dts: sun4i: Add new ba10-tvbox board
ARM: dts: sun4i: Add ir controller nodes and pinmux
ARM: dts: sun4i: Add ir node to various boards
Maxime Ripard (1):
ARM: dts: sun6i: Add Merrii A31 Hummingbird support
Zoltan HERPAI (1):
ARM: dts: sun7i: Add board support for LinkSprite pcDuino V3
arch/arm/boot/dts/Makefile | 7 +-
arch/arm/boot/dts/sun4i-a10-a1000.dts | 15 ++
arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts | 110 ++++++++
arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 15 ++
arch/arm/boot/dts/sun4i-a10-hackberry.dts | 21 ++
arch/arm/boot/dts/sun4i-a10-inet97fv2.dts | 21 +-
arch/arm/boot/dts/sun4i-a10-mini-xplus.dts | 28 ++
arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 15 ++
arch/arm/boot/dts/sun4i-a10-pcduino.dts | 9 +
arch/arm/boot/dts/sun4i-a10.dtsi | 34 ++-
arch/arm/boot/dts/sun5i-a10s.dtsi | 2 +-
arch/arm/boot/dts/sun5i-a13.dtsi | 2 +-
arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 119 ++++++++
arch/arm/boot/dts/sun6i-a31.dtsi | 92 ++++++-
arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 16 ++
arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 16 ++
arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts | 22 ++
arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 10 +
arch/arm/boot/dts/sun7i-a20-pcduino3.dts | 173 ++++++++++++
arch/arm/boot/dts/sun7i-a20.dtsi | 34 ++-
arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts | 30 +++
arch/arm/boot/dts/sun8i-a23.dtsi | 343 ++++++++++++++++++++++++
22 files changed, 1121 insertions(+), 13 deletions(-)
create mode 100644 arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
create mode 100644 arch/arm/boot/dts/sun6i-a31-hummingbird.dts
create mode 100644 arch/arm/boot/dts/sun7i-a20-pcduino3.dts
create mode 100644 arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
create mode 100644 arch/arm/boot/dts/sun8i-a23.dtsi
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140718/639bc452/attachment.sig>
next reply other threads:[~2014-07-18 20:50 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-18 20:50 Maxime Ripard [this message]
2014-07-19 19:22 ` [GIT PULL] Allwinner DT additions for 3.17 Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140718205031.GA27834@lukather \
--to=maxime.ripard@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).