From: peter.chen@freescale.com (Peter Chen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/6] vf610: Add USB support
Date: Tue, 22 Jul 2014 08:13:24 +0800 [thread overview]
Message-ID: <20140722001322.GA6636@shlinux1.ap.freescale.net> (raw)
In-Reply-To: <cover.1405702442.git.stefan@agner.ch>
On Fri, Jul 18, 2014 at 07:01:36PM +0200, Stefan Agner wrote:
> This patchset adds USB support for Vybrid VF610 SoC. It extends the
> clock framework to support the USB PHY cocks, extends the device
> tree files and adds support for the non-core registers in the
> usbmisc_imx driver.
>
> This patchset needs the eSDHC length fix available in Shawn's
> for-next branch.
>
Why it is related to USB patchset?
> The whole patchset proved to be working on a Colibri VF61. The
> first USB controller runs in peripheral mode. I could successfully
> use RNDIS, however with some stability issues: Suddenly the other
> side was not reachable anymore and the interface needed to brought
> down and back up again. I'm still investigating this.
Do you use ubuntu as host distribution? I find ubuntu will lost the
first connection for usb-ethernet-gadget(usb0) as network interface,
but once you re-config usb0 again (ifconfig usb0 ip up), it should work
and will not lose connection any more.
>
> The second USB controller, running in USB host mode, showed no
> issues so far.
>
> Stefan Agner (6):
> ARM: dts: vf610: add USB PHY and controller
> ARM: imx: clk-vf610: add USBPHY clocks
> ARM: dts: vf610: Add usbmisc for non-core registers
> chipidea: usbmisc_imx: Add USB support for VF610 SoCs
> usb: phy: mxs: Add VF610 USB PHY support
> ARM: dts: vf610-colibri: add USB support
>
> arch/arm/boot/dts/vf610-colibri.dts | 10 +++++
> arch/arm/boot/dts/vf610.dtsi | 55 ++++++++++++++++++++++--
> arch/arm/mach-imx/clk-vf610.c | 12 +++++-
> drivers/usb/chipidea/usbmisc_imx.c | 76 +++++++++++++++++++++++----------
> drivers/usb/phy/phy-mxs-usb.c | 5 +++
> include/dt-bindings/clock/vf610-clock.h | 5 ++-
> 6 files changed, 135 insertions(+), 28 deletions(-)
>
> --
> 2.0.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Best Regards,
Peter Chen
next prev parent reply other threads:[~2014-07-22 0:13 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-18 17:01 [PATCH 0/6] vf610: Add USB support Stefan Agner
2014-07-18 17:01 ` [PATCH 1/6] ARM: dts: vf610: add USB PHY and controller Stefan Agner
2014-07-22 2:22 ` Shawn Guo
2014-07-22 9:57 ` Stefan Agner
2014-07-22 13:18 ` Shawn Guo
2014-07-18 17:01 ` [PATCH 2/6] ARM: imx: clk-vf610: add USBPHY clocks Stefan Agner
2014-07-22 2:32 ` Shawn Guo
2014-07-22 6:58 ` Jingchang Lu
2014-07-18 17:01 ` [PATCH 3/6] ARM: dts: vf610: Add usbmisc for non-core registers Stefan Agner
2014-07-18 17:01 ` [PATCH 4/6] chipidea: usbmisc_imx: Add USB support for VF610 SoCs Stefan Agner
2014-07-22 1:52 ` Peter Chen
2014-07-22 2:34 ` Shawn Guo
2014-07-18 17:01 ` [PATCH 5/6] usb: phy: mxs: Add VF610 USB PHY support Stefan Agner
2014-07-22 1:43 ` Peter Chen
2014-07-22 2:16 ` Shawn Guo
2014-07-18 17:01 ` [PATCH 6/6] ARM: dts: vf610-colibri: add USB support Stefan Agner
2014-07-22 0:13 ` Peter Chen [this message]
2014-07-26 12:24 ` [PATCH 0/6] vf610: Add " Stefan Agner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140722001322.GA6636@shlinux1.ap.freescale.net \
--to=peter.chen@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).