From mboxrd@z Thu Jan 1 00:00:00 1970 From: peter.chen@freescale.com (Peter Chen) Date: Tue, 22 Jul 2014 09:43:31 +0800 Subject: [PATCH 5/6] usb: phy: mxs: Add VF610 USB PHY support In-Reply-To: References: Message-ID: <20140722014330.GA10650@shlinux1.ap.freescale.net> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Fri, Jul 18, 2014 at 07:01:41PM +0200, Stefan Agner wrote: > This adds support for the USB PHY in Vybrid VF610. We assume that > the disconnection without VBUS is also needed for Vybrid. For all > other flags, the presumption of innocence applies. > > Signed-off-by: Stefan Agner > --- > drivers/usb/phy/phy-mxs-usb.c | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c > index c42bdf0..207946b 100644 > --- a/drivers/usb/phy/phy-mxs-usb.c > +++ b/drivers/usb/phy/phy-mxs-usb.c > @@ -125,10 +125,15 @@ static const struct mxs_phy_data imx6sl_phy_data = { > MXS_PHY_NEED_IP_FIX, > }; > > +static const struct mxs_phy_data vf610_phy_data = { > + .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS, > +}; > + > static const struct of_device_id mxs_phy_dt_ids[] = { > { .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, }, > { .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, }, > { .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, }, > + { .compatible = "fsl,vf610-usbphy", .data = &vf610_phy_data, }, > { /* sentinel */ } > }; > MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids); > -- > 2.0.1 > Acked-by: Peter Chen -- Best Regards, Peter Chen